no it easy. download a manual from Rem. if you don't have one. all you need to do is get a brass punch or nylon dowel and tap out the 2 trigger assembly retaining pins that are in the receiver Just above the trigger one in front and one behind. then with your finger in the trigger guard pull the assembly up and out. Now you should have access to the bolt from underneath

Pulling the trigger assembly is part of normal cleaning and maintenance. You need to learn. It's very simple.

I fixed it thank you so much for all your help everyone, WOOOOOOOOT IM SO HAPPY :birthday: WITH OUT BIRTHDAY lol

I got it fixxed everyone :d

Yea!!!!!!!