Picatinney for Remington R15
01-01-2010 | 04:47 PM
#3
Boone & Crockett
Joined: Feb 2003
Posts: 10,679
Likes: 0
No, none of the R15's have a rail on the bottom of the gas block.
If you want a rail on the bottom of the gas block then you are going to have to replace the gas block with a dual, quad, or modular rail gas block.
Like this one.
http://www.brownells.com/.aspx/sid=4...as_Block__only
If you want a rail on the bottom of the gas block then you are going to have to replace the gas block with a dual, quad, or modular rail gas block.
Like this one.
http://www.brownells.com/.aspx/sid=4...as_Block__only
01-02-2010 | 05:10 PM
#7
Nontypical Buck
Joined: Feb 2003
Posts: 3,802
Likes: 0
From: Coralville, IA. USA
There is usually a notch in the barrel where a a roll pin indexes and secures the front sight and/or gas block in place. Some gas blocks use a set screw. All work equally well. Replacing the gas block isn't really hard to do. The issue with the R-15 is that it's camo dipped, while any replacement railed gas block will probably be black. If you don't mind this, then your options are wide open as the R-15 uses the same parts as any other AR-15 (it's a rebranded Bushmaster).
Mike
Mike
Mike
Mike
