![]() |
Springfield Armory XD
I am looking and am turning towards this sub compact XD in .40. I have read that the quality of Springfield Armory has done nothing but get better over the years. Does anyone have any thoughts about ths gun. Thanks
|
RE: Springfield Armory XD
My cousin has the same pistol you are asking about and he loves it.
I also heard the same thing about Springfield. I don't own one personally but when I am ready to look at getting another pistol, it will be on my list of ones to look at. |
RE: Springfield Armory XD
I have an XD 40 Tactical, and I can't say enough good things about it.
My next handgun will probably be the sub compact XD9. I had a ton of 9mm ammo laying around, and a Ruger P89 that I never shoot that I will end up trading for the XD. |
RE: Springfield Armory XD
I have that exact gun and love it and all of the safety features built into the gun itself with out having a manual safety to operate.
|
RE: Springfield Armory XD
I just got a brand new one. I took it out Sat and put 1,000 rounds through it with no problems. I got all different kinds of ammo for it. I didnt have any misfires or rounds that wouldnt eject. After about 80 rounds through the short mag it starts to dig into my fingers but with the extenders it was great to shoot that many rounds through. I cant say enough good stuff about it. I highly recomend one.
|
RE: Springfield Armory XD
I own one, it's a great little gun. I took my concel carry class with it. Shot about 2,000 rounds though it with out a problem, But I agree the extended mag fits my hands better.
|
RE: Springfield Armory XD
ORIGINAL: Walleyefever But I agree the extended mag fits my hands better. |
RE: Springfield Armory XD
That is my next gun as well! I figure I need to buy one before Hussein becomes president and bans them.
|
RE: Springfield Armory XD
For the guys that are having issues with the short mags. Get a Pearce finger extension. It will not add any real length to the grip of the gun for concealable purposes but greatly aids in firearm control.
![]() |
RE: Springfield Armory XD
ORIGINAL: bigbulls I have that exact gun and love it and all of the safety features built into the gun itself with out having a manual safety to operate. Spud |
RE: Springfield Armory XD
I have the XD 45 and its a great gun....its solid...easy to take apart...and less moving parts...
I laid it along the M&P and found more positives from the XD....just my opinion. Good Luck! |
RE: Springfield Armory XD
I have the service 40. Great gun. Bought a 9mm barrel conversion so that I can shoot the cheap stuff out of it.
|
RE: Springfield Armory XD
Thanks guys, I am going with the .40 sub compact XD in the green and black.
|
RE: Springfield Armory XD
I've had an XD 9mm Service model for almost 4 years now and I love it. Have several thousand rounds through it without a misfire of any type....Wolf, S&B, WWB, Rem UMC, Blazer ammo. It eats them all.
Definitely one you should consider. I'd love to have a sub-compact XD9. |
RE: Springfield Armory XD
My BIL has one in 9mm and loves it. In my opinion though, it is just another Glock copy, and I am not impressed.
|
RE: Springfield Armory XD
Sounds like a good choice.
|
RE: Springfield Armory XD
ORIGINAL: retrieverman My BIL has one in 9mm and loves it. In my opinion though, it is just another Glock copy, and I am not impressed. I, personally, prefer the XD to the Glock. It has a better grip angle that makes the pistol point better (for me anyway), the trigger is far better than the stock Glock trigger, it's got an ambidexterous mag release, and you don't need to be an 800lb gorilla or an aftermarket lever extension to activate the slide release. I had a Glock 21 that had the 3.5lb trigger kit and extended slide release, and I still prefer my XD to it hands down, which is why I no longer have the Glock, while the XD is in my bedroom ready to greet unwelcome two-legged critters. With the exception of the very small and hard to activate slide release (which may have been since remedied by making the once optional extended slide release standard equipment), there is nothing inherently wrong with Glocks, and if you like the way they feel you won't be making a mistake by buying one. They are a very reliable, tried-and-true, defensive sidearm that have no doubt saved the lives of many cops and armed citizens unfortunate enough to forced to use them in self defense. But I, personally, feel that the XD is an definate improvement on the concept of the manual safety free semi-auto handgun. Mike |
RE: Springfield Armory XD
ORIGINAL: driftrider ORIGINAL: retrieverman My BIL has one in 9mm and loves it. In my opinion though, it is just another Glock copy, and I am not impressed. I, personally, prefer the XD to the Glock. It has a better grip angle that makes the pistol point better (for me anyway), the trigger is far better than the stock Glock trigger, it's got an ambidexterous mag release, and you don't need to be an 800lb gorilla or an aftermarket lever extension to activate the slide release. I had a Glock 21 that had the 3.5lb trigger kit and extended slide release, and I still prefer my XD to it hands down, which is why I no longer have the Glock, while the XD is in my bedroom ready to greet unwelcome two-legged critters. With the exception of the very small and hard to activate slide release (which may have been since remedied by making the once optional extended slide release standard equipment), there is nothing inherently wrong with Glocks, and if you like the way they feel you won't be making a mistake by buying one. They are a very reliable, tried-and-true, defensive sidearm that have no doubt saved the lives of many cops and armed citizens unfortunate enough to forced to use them in self defense. But I, personally, feel that the XD is an definate improvement on the concept of the manual safety free semi-auto handgun. Mike What you called the "slide release" is actuallythe slide stop. It'sdesigned tohold the slide back when the magazine is empty, not release it.What you are supposed to do to release the slide is bring your weak hand over and just slightly pull back on the slide and it will then release, causing the slide to go forward into battery. I only bring this up because you pointed it out as a disadvantage but ifusedas designed it does not take an "800 lb gorilla"to operate.;) I personally think the XD is an excellent firearm but IMO theGlock is abetter defensive firearm. |
RE: Springfield Armory XD
I respectfully disagree. When I was trained to qualify with the M9 in the Corps, the control we are referring to was definately referred to as the slide RELEASE, and we were trained to use it as such. Now, you may be correct that Glock departed from the standard use of this lever, as a simple Google search revealed that there are references to this control as both a "slide lock" and "slide release," but if you are correct referring only to Glock pistols, then this is another mark against Glock. If you are supposed to use your weak hand to move the slid back to reload, what happens when you're hit in the left shoulder and your weak hand is useless? I received training on the one handed reload just in this circumstance, and you most definately use the SLIDE RELEASE to return the slide to battery after you've gotten the fresh mag in the gun. The Glock, with the factory (as you call it) slide stop, is, IMO, to small and being flush against the receiver, too hard to quickly and reliably activate under normal circumstances, let alone in the heat of combat when you've been wounded getting the pistol reloaded quickly is the only thing that might save your life from the guy closing in to finish you off.
Mike ![]() |
RE: Springfield Armory XD
Another pic.
![]() |
RE: Springfield Armory XD
ORIGINAL: driftrider Another pic.
From Glock themselves: http://www.glock.com/english/index_options.htm I should have been specific that this is what Glock calls this on their firearm. While I do agree that the factory slide stop is a tad small to be used as a slide release, I think you are exaggerating its level of difficulty. My 8 year old son can operate it, so itcan't be that hard to accomplish. As a former Marine(assuming you are no longer active)I'm sure you have excellent combat training and can competently operate many different firearms. As a LEO I have trained with many different weapons as well. The slide does not have to be moved very far at all to release the slide.You do bringup a good point about a weak hand injury. I have been trained(as I'm sure you have as well) to use the heel of your boot, your belt, a rock or any other thing you can to rack the slide. The slide can be released on the Glock in the same manner. With practice it can be done quickly as well. |
RE: Springfield Armory XD
Yes, you do whatever you have to do with whatever you have available, but using the slide release is by far the optimum way to send the slide home. I've owned one Glock, which was a Glock 21, so it might have been just my pistol, but it was definately very hard to use in the stock form. I also have large hands and getting my big thumb on that little lever wasn't easy for me. With the aftermarket extended slide release it wasn't a problem, but I guess I feel that this should be something that shouldn't be an issue for anyone. I own, or have owned, a Glock, an H&K USP, a Beretta 92FS (in addition to the M9 service pistol I carried in the Corps) and the XD, and I've shot various forms of the 1911, and the Glock is the only one that uses such a small and hard to use slide release lever. But like I said, if Glock would put the extended lever as stock equipment then it'd be on par with the others. But in the factory form, the XD, by comparison is better in this regard.
I guess my point is that I feel that the XD is a better, more refined design that makes up for what I percieve to be some of the shortcomings of the Glock. But I also do honestly think that the Glocks are a decent and capable defensive pistol for those who like them and are comfortable with them, but they not for me and I'll never own another one. Mike |
RE: Springfield Armory XD
ORIGINAL: driftrider Yes, you do whatever you have to do with whatever you have available, but using the slide release is by far the optimum way to send the slide home. I've owned one Glock, which was a Glock 21, so it might have been just my pistol, but it was definately very hard to use in the stock form. I also have large hands and getting my big thumb on that little lever wasn't easy for me. With the aftermarket extended slide release it wasn't a problem, but I guess I feel that this should be something that shouldn't be an issue for anyone. I own, or have owned, a Glock, an H&K USP, a Beretta 92FS (in addition to the M9 service pistol I carried in the Corps) and the XD, and I've shot various forms of the 1911, and the Glock is the only one that uses such a small and hard to use slide release lever. But like I said, if Glock would put the extended lever as stock equipment then it'd be on par with the others. But in the factory form, the XD, by comparison is better in this regard. I guess my point is that I feel that the XD is a better, more refined design that makes up for what I percieve to be some of the shortcomings of the Glock. But I also do honestly think that the Glocks are a decent and capable defensive pistol for those who like them and are comfortable with them, but they not for me and I'll never own another one. Mike All I was pointing out was in its original design, the Glock slide stop lever is not designed to be a slide release. I guess we can agree to disagree:). |
RE: Springfield Armory XD
like many others i have 2 XD40 one all black and one tu tone OD green and black and i cant say enough about these guns..
they have shot many rounds and i cant get enough of them... |
RE: Springfield Armory XD
You mention that you owned a Glock 21. The Glock 20/21 has a larger frame/grip area than the other Glocks so maybe that was the problem? Most complaints that I hear about the G20/21 center around how big and fat the grip area is. All I was pointing out was in its original design, the Glock slide stop lever is not designed to be a slide release. I guess we can agree to disagree. Mike |
| All times are GMT -8. The time now is 01:50 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.