HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   M1A question!!! (https://www.huntingnet.com/forum/guns/248286-m1a-question.html)

brushbustin 06-04-2008 01:30 PM

M1A question!!!
 
Ihave just got an M1A and have a question about it,I have not got to shoot it yet either.Anyway,when you pull the bolt all the way back until it locks in place,to get it to go back foward i have to drop my magazine down just a little bit so i can press the magazine release all the way in to release the bolt.Is this normal?Not sure if i should be pulling it all of the way back to chamber a round.I have tried to explain this the best i can,so help.....

Rammer 06-04-2008 01:41 PM

RE: M1A question!!!
 
If the gun is unloaded that is normal.

brushbustin 06-04-2008 01:44 PM

RE: M1A question!!!
 
Okay so when there is a round in the magazine it will not do that?

Rammer 06-04-2008 01:46 PM

RE: M1A question!!!
 
Nope, unless something else is messed up, which I doubt. Put a round in an try it.

brushbustin 06-04-2008 02:02 PM

RE: M1A question!!!
 
Thanks Rammer!It is brand new and unfired.I plan to put some rounds down range this weekend.

ipscshooter 06-04-2008 02:16 PM

RE: M1A question!!!
 
Congrats on a fine weapon. My very first experience with mine was in a three gun match. First two shots were at 115 yards, head shots on a standard USPSA target, about 1.5 inches apart with open sights and never having shot the rifle before. Needless to say, I was quite happy with it...

You might want to take a spin through the owners manual. It'll answer most of your operational questions.

eldeguello 06-05-2008 06:48 AM

RE: M1A question!!!
 

ORIGINAL: brushbustin

Ihave just got an M1A and have a question about it,I have not got to shoot it yet either.Anyway,when you pull the bolt all the way back until it locks in place,to get it to go back foward i have to drop my magazine down just a little bit so i can press the magazine release all the way in to release the bolt.Is this normal?Not sure if i should be pulling it all of the way back to chamber a round.I have tried to explain this the best i can,so help.....
Well, the bolt will NOT lock back unless there's an empty magazine in place, because it is the magazine follower that pushes the bolt lock up, powered by the magaziner spring. So if you are trying to unlock the bolt while pushing against this spring tension, it will make it that much more difficult to get it to unlock. I suspect that's what is making you have to drop the magazine a little so you aren't fighting the magazine spring! This is quite normal!


However, when there's ammo in the magazine, nothing is pushing up on that bolt lock, so all you need to do is pull the open bolt back slightly, then release it. It will disengage from the lock, and slam forward, taking the top round with it.

Enjoy. The M1A/M14, IMO, is the best military rifle the U.S. has ever issued to date!!


All times are GMT -8. The time now is 03:27 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.