HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   Encore trigger job (https://www.huntingnet.com/forum/guns/24284-encore-trigger-job.html)

soonershooter 02-21-2003 12:17 AM

Encore trigger job
 
I sent my encore away to Bellm for the deluxe job and the trigger has a great trigger pull but there' s still some creep. I emailed him and was told it' s in the unorthodox design of the engagement. He said he doesn' t monkey with the engagement because the hammer can possibly be pushed off. Before I sent it for the work the creep was jagged and now it' s imperceptible unless I watch my finger on the trigger. Bellm said not to worry about what I see and concentrate more on what I feel. I dry fired it with an empty cartridge and it feels good and he' s right I can' t perceive the creep. He said TC' s trigger is not like any other design. Do any of you have the same experience and is my answer from Bellm correct? I feel better about it but wanted some feedback from those who might know.

herman 02-21-2003 03:45 AM

RE: Encore trigger job
 
I did my own using bellem springs and a little touch up and have absolutelt no creep.Mine is set at 2 1/2 lbs. love it.

PaJack 02-22-2003 12:20 PM

RE: Encore trigger job
 
I sent my Encore to www.virginvalleyguns.com and it came back without any creep...[:o]

sothrdnk 02-22-2003 06:51 PM

RE: Encore trigger job
 
I sent mine to E.Arthur Brown for a trigger job and to have a muzzlebrake put on it as well as a new finish. The trigger pull is superb, it is right at 2 lbs with no creep at all. It shoots great. I hunted with it during gun season and took two deer with it. The muzzle brake makes the .300 win mag barrel shoot like a dream.
Check his web site at www.eabco.com.

soonershooter 02-23-2003 07:17 AM

RE: Encore trigger job
 
I appreciate your answers guys. Could you all check your encores and just look at your trigger while you pull it. If it moves a little at all is the same condition that I have. You can' t feel it but you might see it. Mine looks more like a " flex" than a creep and I just wanted confirmation. I would appreciate it.

CAM2 02-28-2003 06:50 PM

RE: Encore trigger job
 
i did my own a couple of weeks ago. i used the free encore trigger program, a #4 spring and a wyoming stone from mike bellm and i have my trigger pull at 2 pounds and it is real crisp with no creep, i like it a lot.


All times are GMT -8. The time now is 06:53 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.