HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   sako 85 scope mounts (https://www.huntingnet.com/forum/guns/221236-sako-85-scope-mounts.html)

bluffhunter 12-06-2007 06:57 AM

sako 85 scope mounts
 
Whats the prefferred scope mount for the sako 85 in the 300 WSM models? are the optilocks worth it, or go with leupold mounts? ;)

RugerMike 12-06-2007 07:04 AM

RE: sako 85 scope mounts
 
I have a set of Sako rings if you are interested $25 shipped? e-mail [email protected]

oldelkhunter 12-06-2007 07:25 AM

RE: sako 85 scope mounts
 
I like the sako rings because they are A. made for the rifle and the scope is centered with the bore B. They are bulletproof and protect the scope finish.

If your scope has up to a 50mm objective you can get away with lows easily, I would opt for the Ringmounts(1pc) and if the scope is less then 50mm go with the extra low 2 piece rings which are now available. Then you'll have to determine what bases to get because of the scope length. Short bases for short tubes etc. Get a metric allen set at your local Lowes or HOme depot and use it to tighten the Sako ring screws. The wrench sako provides is made of soft stainless and will mess up the heads on the screws. Trust me at 4 dollars a screw you don't want to mess them up. Leupold mounts don't have a stop pin on the rear base and are nowhere as sturdy. Let me know what kind of scope your putting on it and I can give you more info.

bluffhunter 12-06-2007 08:26 AM

RE: sako 85 scope mounts
 
putting leupold VXIII 2.5-8 on it. Thanks.

trailer 12-06-2007 08:56 AM

RE: sako 85 scope mounts
 
I have installed Conetrol rings and bases on 2 of my Sako rifle. They are a little tricky to install but I like the end result being the look without any mounting screws on the rings. I also have Optilok rings on another Sako rifle and like the design with the protective ring. I find the rings are set a little high for a 40 mm scope , even if they are the extra low set up...:eek:

oldelkhunter 12-06-2007 09:07 AM

RE: sako 85 scope mounts
 

putting leupold VXIII 2.5-8 on it. Thanks.
Then you would use short bases


have installed Conetrol rings and bases on 2 of my Sako rifle. They are a little tricky to install but I like the end result being the look without any mounting screws on the rings. I also have Optilok rings on another Sako rifle and like the design with the protective ring. I find the rings are set a little high for a 40 mm scope , even if they are the extra low set up...:eek:

COnetrols are a real nice setup as well..your going to get them in CM but they are available in SS for 50% more. A PITA sometimes to setup but they are strong as all get out and windage adjustable and are way prettier then Optilocks. I have a 42mm Kahles on my "low" rings and they could surely go down a little and look a lot nicer.


All times are GMT -8. The time now is 01:28 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.