HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Guns (https://www.huntingnet.com/forum/guns-10/)

- - need help (https://www.huntingnet.com/forum/guns/16585-need-help.html)

deer hunter 21

11-19-2002 03:58 PM

need help

i'm sighting in my 30-06 180 grain rem how high do i need to be at 100 to be dead on at 250 thanks.

mauser06

11-19-2002 04:36 PM

RE: need help

only way to know is to shoot at 250 and see where you hit...you can go look at remingtons sight and under ammunition goto ballsitics and see but i wouldnt live by it...id practice adn shoot at that range...

Penobscot

11-19-2002 04:38 PM

RE: need help

If your zeroed in at 100 yards with a 180 gr NP then you'd be 8.4 inches low at 250. Check out Remingtons web site under ammunition and they have all the ballistic info you could ask for. Here is a link.
http://www.remington.com/ammo/ballis...e/3006sbal.htm

handloader1

11-19-2002 10:05 PM

RE: need help

3.3" high at 100yd. should get you close, but you have to shoot the rifle to be sure. Good luck.

frizzellr

11-20-2002 07:42 AM

RE: need help

Just shoot the rifle and see where it hits at whatever distance you want.

PaJack

11-20-2002 03:18 PM

RE: need help

Best advice..shoot the distance you want it zeroed...<img src=icon_smile_big.gif border=0 align=middle>

Hunt Safe!

Jack

Ruger-Redhawk

11-21-2002 02:44 PM

RE: need help

I third that!!!!!! Take it out to the distance you want and shoot it.See where it hits and adjust accordingly. All rifles shoot different.I would never second guess where it's shooting at those long distances.
Ruger Redhawk

Support the NRA...Protecting our Gun Rights and Freedoms is everybody's responsibility. Ruger Redhawk A proud NRA Life Member since 1977.

All times are GMT -8. The time now is 02:30 AM.