shotgun problem
03-25-2006 | 03:07 PM
#1
Thread Starter
Fork Horn
Joined: Feb 2003
Posts: 122
Likes: 0
From: rochester NY
shotgun problem
i just got pasted down my granfathers old revelation 12ga shotgun. the gun is in alright shape but has some problems. The wooden stock is loose and i was wondering is there a way to take it off and tighten it in. Any feedback wood be great thanks.
03-25-2006 | 03:20 PM
#2
Fork Horn
Joined: Sep 2005
Posts: 307
Likes: 0
From: Waterford, MI.
RE: shotgun problem
Remove the buttplate or recoil pad and you should find a stock bolt or screw at the bottom of the hole in the center of the stock. You can tighten the stock using a Proper sized screwdriver that fits the screw slot if it is a screw type or a deep well socket and extension if it's a bolt. This will work if it is a pump or auto type shotgun.
