HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Guns (https://www.huntingnet.com/forum/guns-10/)
-   -   cleaning rifle after shooting (https://www.huntingnet.com/forum/guns/126577-cleaning-rifle-after-shooting.html)

duckdog132 12-27-2005 06:03 PM

cleaning rifle after shooting
 
what steps do you take when cleaning yourrifle after shooting it? details please. thanks Jeff

duckdog132 12-27-2005 07:48 PM

RE: cleaning rifle after shooting
 
BTT

statjunk 12-28-2005 08:17 AM

RE: cleaning rifle after shooting
 
It really depends on what type of gun you have but this is how I clean my bolt rifle.

1. Remove the bolt
2. Use a bore guide
3. Send a couple of wet patches down the barrel
4. Let it sit for a couple of minutes
5. Scrub the barrel with a copper brush
6. Repeat steps 3 through 5
7. Run dry patches down the barrel till they come out nearly completely clean
8. Run a patch with a little bit of oil on it down the barrel.
9. Clean the action and the bolt

Tom

mrwhitetailhunter 12-28-2005 11:42 AM

RE: cleaning rifle after shooting
 
fill the bath tub with 50% bleach and 50% amonia and just throw the whole gun in. let sit for 36 hours. works everytime:D:D:D

statjunk 12-28-2005 11:47 AM

RE: cleaning rifle after shooting
 
If he has a wood stock he will ruin his stock. lol.

Tom

duckdog132 12-28-2005 01:42 PM

RE: cleaning rifle after shooting
 
yeah i dont think i will be doing the bath tub trick.. i was just wondering what you guys do as far is bore cleaning. like do ujust use a pawder cleaning through it and put some oil on it or do you use a coper solvent too. etc. i dont want to mess my gun up if i can help it

stubblejumper 12-28-2005 02:11 PM

RE: cleaning rifle after shooting
 
I actually very seldom use a brush.Using a one piece dewey rod and a bore guide,I run two patches soaked with sweets 7.62 down the barrel about6 to8 strokes each.I then run a patch soaked with g-96 gun treatment down the barrel to neutralize the sweets and to provide some corrosion resistance.If I am not going to shoot the gun for awhile I leave the bore in this state,but I run a dry patch through the bore before firing the gun.The worst thing that you can do to a barrel is to use one of those multi piece aluminum rods as they flex badly and rub the inside of the bore.

dynatec 12-28-2005 06:45 PM

RE: cleaning rifle after shooting
 
that some good advise for the most part but if a safty officer answered the first thing would be to point the muzzel in the safest direction
Rremove the cartraige
Observe the chamber
Verify the feed
Examine the bore
just a reminder, better safe than sorry:)

North Texan 12-28-2005 06:52 PM

RE: cleaning rifle after shooting
 
I run a patch with oil down them every now and then. Most of my barrels are moly treated, so I don't ever use a brush or any type of solvent.

duckdog132 12-28-2005 07:40 PM

RE: cleaning rifle after shooting
 
molly treated? do you know are savages molly treated. and what is that exactly


All times are GMT -8. The time now is 03:58 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.