I recently bought a Inferno Blitz. When i went to sight it in at 20 yards the bolts allways would hit either high and left or high and right no matter how many clicks i went with the scope they still hit the same spot. Anyone have any ideas what i can do to fix this

Sounds like the scope has problems. But first do at least 10 clicks and see if that makes a difference.

Two kind of scopes out there 1/2 inch per click at 100 yards or 1/4 inch per click at a 100 yards. Its should be on your adjustment rings remove the cap and look.
1/2 per click at 100 takes 10 clicks at 20 yards to move it an inch.
1/4 per click at 100 takes 20 clicks at 20 yards to move it an inch.
Before you call it junk take the scope and mounting rings etc off disassemble it and reassemble it back on the bow take care to make sure everything is aligned and in its proper place. Now go back out and site it in at 10 and 20 yards. Them move to 30 yard and zero out your bow.