NAP reply on Bloodrunner heads
09-29-2010, 08:04 AM
#1
Fork Horn
Thread Starter
Join Date: Jul 2007
Location:
Posts: 187
NAP reply on Bloodrunner heads
I contacted New Archery Products and asked about using Bloodrunners in crossbows, I told them I shot an old Excal Exocet.
Here is their reply...
Hi Barry,
Some of the older Exocet models had a stirrup that was fairly close to the broadhead blade. That poses a potential clearance and safety risk. Here’s what to do: lay an arrow in the track. Measure the vertical distance from the bottom of the arrow to the closest opposite surface of the stirrup. If it’s al least 1-1/4” you’re safe.
Here is their reply...
Hi Barry,
Some of the older Exocet models had a stirrup that was fairly close to the broadhead blade. That poses a potential clearance and safety risk. Here’s what to do: lay an arrow in the track. Measure the vertical distance from the bottom of the arrow to the closest opposite surface of the stirrup. If it’s al least 1-1/4” you’re safe.
