Brass Inserts for Easton Arrows
03-31-2009 | 04:06 AM
#1
Thread Starter
Fork Horn
Joined: Jan 2008
Posts: 478
Likes: 0
From:
Brass Inserts for Easton Arrows
Hi All:
OK, Since no one else makes a brass insert that fits in an Easton arrow we decided to make one. We used a higher grade brass with less lead in it than the Gold Tips and as you can see by the photo it is longer than the Gold Tip insert and slides like butter into a Easton carbon shaft.Then weigh in at 112.7 grns. We rounded out the corners on the flutes so the glue will flow abit better and with a 125gr tip, aluminum nocks 22" Easton shafts, and 4" vanes it comes out to 524grains total, 514 with blazers, so this should work out very well for those of you looking for more FOC and abit more total weight from your arrows...They are a pain to make in small batches, so they are .99ea. + shipping ($2.00 by US first class mail, $4.95 by Priority) and ofcourse we can make complete arrows with these for you if you would like. If you would like to order some PM me, email me or give me a call...
Thanks
Wyvern
[email protected]
603-659-0575
P.S. This forum does not have a crossbow specific classifieds, does it?? This really belongs there, sorry for the missplacement...
OK, Since no one else makes a brass insert that fits in an Easton arrow we decided to make one. We used a higher grade brass with less lead in it than the Gold Tips and as you can see by the photo it is longer than the Gold Tip insert and slides like butter into a Easton carbon shaft.Then weigh in at 112.7 grns. We rounded out the corners on the flutes so the glue will flow abit better and with a 125gr tip, aluminum nocks 22" Easton shafts, and 4" vanes it comes out to 524grains total, 514 with blazers, so this should work out very well for those of you looking for more FOC and abit more total weight from your arrows...They are a pain to make in small batches, so they are .99ea. + shipping ($2.00 by US first class mail, $4.95 by Priority) and ofcourse we can make complete arrows with these for you if you would like. If you would like to order some PM me, email me or give me a call...
Thanks
Wyvern
[email protected]
603-659-0575
P.S. This forum does not have a crossbow specific classifieds, does it?? This really belongs there, sorry for the missplacement...
