HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Crossbows (https://www.huntingnet.com/forum/crossbows-76/)
-   -   Shoot-thru Mesh (https://www.huntingnet.com/forum/crossbows/175853-shoot-thru-mesh.html)

Terri S 01-17-2007 05:52 PM

Shoot-thru Mesh
 
I have a blind that has shoot-thru mesh, but I don't know how well it works to actually shoot through it. Any real world experience you can tell me about?

Terri S.

Pydpiper 01-17-2007 06:04 PM

RE: Shoot-thru Mesh
 
I bought a blind this fall with the mesh..
I am a fanatic about anything that alters my arrow so much a 1/4 inch for any reason..
I tried the mesh screens and the bolt passed through flawlessly, did not affect POI at any range from 20 to40 yards with practice tips or broad heads.
Don't give it a second thought, hard to imagine, but absolutely zero effect.

I have not tried mechanical broad heads yet, and may never, but my comment doesn't include those..;)

Terri S 01-17-2007 06:08 PM

RE: Shoot-thru Mesh
 
From what I understand, it can trip the mechanical broadheads and cause them to open early.

Hotburn76 01-17-2007 07:39 PM

RE: Shoot-thru Mesh
 
If you do a search on it in the Bowhunting forum I now it has been talked about alot over there. It seemed the consensus over there was that it had no effect on fixed blades but some guys with mechs reported about them opening up. I have not tried them yet.

Pydpiper 01-18-2007 05:52 AM

RE: Shoot-thru Mesh
 
I am going to pick up a variety of mechanicals, I may send some throught the mesh just to see what happens..


htoler 01-18-2007 06:59 AM

RE: Shoot-thru Mesh
 
Many of the mechanicals will open when going thru the mesh screens, all the reading I have done I have found none that say they will or claim they will not open when shot thru the mesh screens,, I had some that came from Rural King don't remember the brand but they opened when shot thru the screen and when i tried to add another o ring then they didn't open even when they hit the target on impact they partially opened entering ..

Bigg~BirddVA 01-18-2007 08:21 AM

RE: Shoot-thru Mesh
 
I've shot mechanicals through the mesh. I double rubber band them (Rocket Slammerheads and other Rocket heads) and they do not open or fly enough off at 20-40 yards to matter. My suggestion is to buy a piece of replacement mesh and practice away. I tape a piece to a ladder and shoot through the big "A" area. Saves your blind and you can see what heads do what. DB, Cabelas sell the replacement mesh. Definitely worth the time and effort. I've had some fixed heads fly worse than some mechanicals. Trying your xbow and arrow and head lets you know your combo is working.

BuddyBo 01-18-2007 07:00 PM

RE: Shoot-thru Mesh
 
My ground blind states to absolutely NOT shoot any type michcanical BH thorough the screens. Only Fixed BH only. Shooting machs through the screenwould be like the POI anyway, defeating the purpose of the BH. Like premature ejeculation. LOL. Duh
BBO

martinfaw 01-18-2007 10:09 PM

RE: Shoot-thru Mesh
 
I shoot the NAP shockwave mechanicals with 1 band in my exomag and
barnett revolution they work fine.

Martinfaw

GrumpyTom 01-19-2007 09:48 PM

RE: Shoot-thru Mesh
 

ORIGINAL: Hotburn76

If you do a search on it in the Bowhunting forum I now it has been talked about alot over there. It seemed the consensus over there was that it had no effect on fixed blades but some guys with mechs reported about them opening up. I have not tried them yet.
I use the SpitFire Mechanicals and they are not efffected going through the screen. The target showed a closed head on entry and dead on target. just remember to use NEW RETAINER CLIPS and you should not have a problem.


All times are GMT -8. The time now is 06:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.