when i use my rope cocking aid on my horton it hits my elevation adjuster and changes it ane solution for this problem

I read alot on the xbow forums, and the movement of those adj is a common problem. There are a couple of ways around it, but all are mostly to pin or epoxy it in one position and then go to a multi aim point system like a red dot w/ three dots or a scope w/ several aim points. The last and least favorable to me would be to fix it in one spot and if you stay w/ single red dot, just learn the hold-overs. I'm very partial to the Vari-zone scopes, got three and they are all dead nuts from 10 - 50 yds. I really don't like having to try to remember hold overs, because now you have added another variable in the deal besides range.[memory] I use a range finder like it was welded to me, lol and the v-zone does the rest. Good luck!!

i have the same problem as you ..now i just check to make sure it's on "0" before i shoot....which my bow shoot's the same out to 30 yards....

Wecome to the forum Tom!

thanks guys guess i will just make it at 30 and try to rember to check it

Jim, it just occured to me that some guys epoxy their elevation adjustment mechanism so that it cannot move.