![]() |
Fixed or mechanical broadheads?
I have always been a big fan of fixed blade broadheads. I have heard alot of talk of mechanicals not opening, wounding deer, tracking deer for miles before recovery, ect. Can anybody shed some light or ideas about this?Any recommendations of broadheads, I currently use muzzy 100 gr 3 blades with my coumpound.
Horton Supermax 175 |
RE: Fixed or mechanical broadheads?
I use Spitfire Mechanicals with my Horton Legend, never had a problem with them. 5 shots 5 dead deer, farthest any went was about 120 yards running mostly in a circular path, about 25 yards as the bolt flies, two dropped on the spot.
IMHO it is all in shot placement, good shot placement means a humanely downed animal,poor shot placement theyare not. |
RE: Fixed or mechanical broadheads?
I am far from being an expert. But since you didn't exclude me yur going to see what I gotta say! LOL.
The permature opening of a mechanical can be caused by hitting some thing like a branch or by a overly violent acceleration of the arrow/bolt. With some mechanicals like the wasp you can double band (two o rings) the blades if you are using an xbow that is too fast. Any one correct me if you wish but I believe an xbow that is rated at 300 or more can have this happen. Hitting a branch or a twig can cause the premature opening as well. After having said that hitting a branch or twig will do nothig but decrease your broadhead's ability to stay on its path as well. Do we need mechanicals on xbows...no we do not. I use wasp mechanicals because of the broad cut thats all! Shot placement is the #1 path to success period. If you can put a 1" broadhead where its needed then thats all you need for a quick humane kill. End of story. So if a fixed broadhead does what you want then use it. If a mechanical does what you want better then use that instead. It all else is equal, use what gives you the most confidence and to hell with what everyone else says, they are not pulling the trigger and taking responsibility, you are! So do I always use a mechanical? Do I take more deer more deer than anyone else? Do I know more than anyone else? Am I an authority on broadheads? No but I did stay at the holiday inn last night!:D |
RE: Fixed or mechanical broadheads?
Dnk,
I am the farthest from an expert on crossbows, so any and all advice is greatly appreciated. |
RE: Fixed or mechanical broadheads?
Jc, nothing in the 80 or more four legged animals that I shot (bolt, arrow, slug or bullet via xbow, compound, rifle or handgun) in the boiler room every went more than 100 yards. With out a question the thunderheads are the toughest, most accurate bheads I have ever used. In the end its all about shot placement and confidence. Use what you KNOW what will hit your mark and to hell with anyone else! Its your show, your hunt, your responsibility.:)
|
RE: Fixed or mechanical broadheads?
I have used the monotec G5 broadheads for the last 2 years and i luv them...wont hunt with anything else..its all about personal preferrance though...everyone that has said it is right "a well place shot is the key"...nothing more nothing less
|
RE: Fixed or mechanical broadheads?
|
RE: Fixed or mechanical broadheads?
choice of broadheads is like choice of bows its more what you like and fell comfortable using,, there is on thing for sure if you hunt out of a blind that has shoot thru screens you have to stick with fixed blades I do not know of any mechanicals you can use in a blind with shoot thru screens..
|
RE: Fixed or mechanical broadheads?
ORIGINAL: htoler there is on thing for sure if you hunt out of a blind that has shoot thru screens you have to stick with fixed blades I do not know of any mechanicals you can use in a blind with shoot thru screens.. I shoot the spitfire mechanials and will shoot nothing else.they have performed well for me over the last few years(ever since they came out). I have taken 11 deer and several hogs and three turkeys with the spitfire and all have gone less than 75 yards. it all depends on what you like. |
RE: Fixed or mechanical broadheads?
ORIGINAL: Tree climber ORIGINAL: htoler there is on thing for sure if you hunt out of a blind that has shoot thru screens you have to stick with fixed blades I do not know of any mechanicals you can use in a blind with shoot thru screens.. I shoot the spitfire mechanials and will shoot nothing else.they have performed well for me over the last few years(ever since they came out). I have taken 11 deer and several hogs and three turkeys with the spitfire and all have gone less than 75 yards. it all depends on what you like. |
RE: Fixed or mechanical broadheads?
I fyou want some data on how some of the different brands of broadheads performed and the person that tested them opinion on the follow this link,, http://www.american-hunter.com/broadheads/broadhead_test.htm
theres some interesting info,, |
RE: Fixed or mechanical broadheads?
My favorites are 125 gr Spitfire or the 125 gr Thunderheads (out of a blind).
I've never had a problem with premature opening on the Spitfires-it's all in the way they are made, but I have seen 1 or more of the blades try to close back up after going completely thru the deer. I know that the blades all opened from the initial cut marks and the enormous exit hole. The deer usually don't go more than 80 yards with a hole like that. |
RE: Fixed or mechanical broadheads?
Muzzy Bad to the Bone!:DThats what i use, 4 blade 100gr. 1" dia. YES!:)
|
RE: Fixed or mechanical broadheads?
I use the wasp jackhammer SST's mechanical. I love them so far. I have never used a fixed blade head and don't plan on changing. If I had to switch it would be to spitfires. [/align] |
| All times are GMT -8. The time now is 09:24 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.