Reflex Grizzly and WB
 

I was wondering if anyone else with had come acrosse the same problem that I just did. I just bought a new Reflex Grizzly and I was installing a Whisker Bisquit rest on and I noticed that with the rest installed I cannont get the screw to adjust the rest in and out, away from the riser. I think I can get away with simply removing the entire rest, making the adjustment then reinstalling it, hopefully with out messing everything else up. If that doesnt work then I thought maybe I could reverse the direction the screw is in, that would require some drilling, tapping and a new screw. But it is on there now, hopefully get to do some shooting yet this week.

Has anyone come across this problem with other bows that have a riser design similar to the Reflex, with the triangulated riser.

Thanks

RE: Reflex Grizzly and WB
 

I just set one of these up for my father on his grizzly, and you will indeed have to take the rest off the bow to adjust.

RE: Reflex Grizzly and WB
 

I have the exct combo you describe. It only takes a few minutes to adjust then you are done. No problem really.