oneida esc black eagle
 

Does anybody know the ibo of the oneida esc black eagle bow?

RE: oneida esc black eagle
 

I'll bet Dairy King can answer this question. Where is he.

RE: oneida esc black eagle
 

I believe it is 308.. Depends on what cam and what outboard but officially it is 308. Now, do a Stealth conversion on it and it is loads faster...

RE: oneida esc black eagle
 

I paged Dairy. He should be here shortly.:D

RE: oneida esc black eagle
 

308? I thought it was only 298? [&:] I'll look her up for you though.

btw...Thanks Zak!

RE: oneida esc black eagle
 

IBO is 305. Dare I say Dairy is wrong?[:o]

RE: oneida esc black eagle
 

I'm 95% sure that the 2005 brochure is saying 308...Just found it.. I guess i should have said I was 98% sure it was 305...

RE: oneida esc black eagle
 

Well...Ive looked at about 4 different sites, and they all have different speeds. One says 290, one says 305, another says 298...I haven't seen the same speed. They may be "slow" compared to Bowtechs and Mathews, but I am, and Im sure you would be too, very willing to give up a little speed for the smooth and easy draw on and Oneida.

RE: oneida esc black eagle
 

Ha, hardly!:D

RE: oneida esc black eagle
 

DK you know what module you put in there is going to have a huge affect on the speed. Be is the 50% or the 80% or one of the other ones. If you use the short cams or the medium cams and if you are using the LF limbs or not because of the impact this has on brace heights. Kind of a hard bow to give an official IBO too really with all the different variences in it..

And as far as speed is concerned.. Put the Stealth conversion on it and most bows don't have much on them when it comes to speed.. I believe it IBOed at 330 at the time it was produced and that was with the wood outboards. A guy with a 29.5 draw was shooting 350 grain arrows at 328 with the wood ones. ESC limbs add anywhere from 5-10 fps on the Black Eagle from what I have been told. And the new custom ones are just... so darn nice it isn't funny.