Can I use these arrows
01-05-2004 | 07:46 PM
#1
Thread Starter
Senior Member
Joined: Aug 2003
Posts: 4,103
Likes: 0
From: Ocean Springs, MS
Can I use these arrows
http://cgi.ebay.com/ws/eBayISAPI.dll...category=20836
I found these arrows and am going to use them for my PSE fire flite. I am pulling 50 lbs and 27". How long should I get these arrows cut. How much will they weigh. I need 360 grains of arrow min. for my bow. Thanks
I found these arrows and am going to use them for my PSE fire flite. I am pulling 50 lbs and 27". How long should I get these arrows cut. How much will they weigh. I need 360 grains of arrow min. for my bow. Thanks
01-05-2004 | 09:08 PM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 6,921
Likes: 0
From: Saskatchewan Canada
RE: Can I use these arrows
Zak try this link to find out if the arrows will work for your setup.
[link]http://www.archeryoutdoors.com/shaft-selector-guides/huntingshafts/step1.tpl[/link]
To determine your arrow length goto a proshop and get them to give you that info. It depends on your rest & position of the rest on the riser, as such it would best to get an actual reading done with a test arrow. It won't cost you a dime and you'll know for sure.
[link]http://www.archeryoutdoors.com/shaft-selector-guides/huntingshafts/step1.tpl[/link]
To determine your arrow length goto a proshop and get them to give you that info. It depends on your rest & position of the rest on the riser, as such it would best to get an actual reading done with a test arrow. It won't cost you a dime and you'll know for sure.
Thread
Thread Starter
Forum
Replies
Last Post
Octopus
Bowhunting
9
10-12-2008 05:41 PM
bowmasterjoe80
Bowhunting
1
10-28-2003 12:40 PM
