Halfway pulling bow
01-01-2004 | 11:33 AM
#1
Thread Starter
Senior Member
Joined: Aug 2003
Posts: 4,103
Likes: 0
From: Ocean Springs, MS
Halfway pulling bow
I ordered a bow. It is 506/60 lbs pull. I'm not sure if I can pull 60. When I get my bow tomorrow, could I pull it back to see if I can handel it. Then let the string go slowly. Not like shooting it but like holding on to the string as I let the string return to the first position. Thanks
01-01-2004 | 11:50 AM
#2
Giant Nontypical
Joined: Feb 2003
Posts: 5,497
Likes: 0
From: Dover, PA USA
RE: Halfway pulling bow
Zak,
I hope what you are describing is "Letting Down" the bowstring.......NEVER just let the string go at any point in the draw unless you are shooting an arrow at a good backstop. Even a half draw "Dry Fire" can damage your bows parts.
If you can't get it all the way back, simply guide the string back to rest the entire way with your hand/release still hanging on to the string.
I'm going to give you some advice,and it's not meant to insult you in ANY way shape or form......
If you ordered the bow from a Pro-shop have the tech guys set you up properly for draw length/draw weight/arrows /accessories etc. Most shops that you buy a bow from will be happy to help you out getting started properly.
They should be able to set your bow up properly for you and your abilities.
If you ordered the bow from some other source, STILL head to your local pro-shop and see if they will help you.......It's a good idea to develop a relationship with a shop that you can trust. It sounds like you will need some professional guidance with your new purchase. You will most likely have to pay for services that might have been included with a pro-shop purchase, but start a relationship with your local shop.
And of course you can always bring your questions here......but if you are a beginner you will most likely benefit from some hands on help.
Good luck,
Matt
I hope what you are describing is "Letting Down" the bowstring.......NEVER just let the string go at any point in the draw unless you are shooting an arrow at a good backstop. Even a half draw "Dry Fire" can damage your bows parts.
If you can't get it all the way back, simply guide the string back to rest the entire way with your hand/release still hanging on to the string.
I'm going to give you some advice,and it's not meant to insult you in ANY way shape or form......
If you ordered the bow from a Pro-shop have the tech guys set you up properly for draw length/draw weight/arrows /accessories etc. Most shops that you buy a bow from will be happy to help you out getting started properly.
They should be able to set your bow up properly for you and your abilities.
If you ordered the bow from some other source, STILL head to your local pro-shop and see if they will help you.......It's a good idea to develop a relationship with a shop that you can trust. It sounds like you will need some professional guidance with your new purchase. You will most likely have to pay for services that might have been included with a pro-shop purchase, but start a relationship with your local shop.
And of course you can always bring your questions here......but if you are a beginner you will most likely benefit from some hands on help.
Good luck,
Matt
01-01-2004 | 12:12 PM
#3
Thread Starter
Senior Member
Joined: Aug 2003
Posts: 4,103
Likes: 0
From: Ocean Springs, MS
RE: Halfway pulling bow
[quote]ORIGINAL: Matt / PA
Zak,
I hope what you are describing is "Letting Down" the bowstring.......NEVER just let the string go at any point in the draw unless you are shooting an arrow at a good backstop. Even a half draw "Dry Fire" can damage your bows parts.
Yes, I was refering to "Letting Down". I just couldn't think of the name.
I'm going to give you some advice,and it's not meant to insult you in ANY way shape or form......
Thanks this advice helps a lot.
If you ordered the bow from a Pro-shop have the tech guys set you up properly for draw length/draw weight/arrows /accessories etc. Most shops that you buy a bow from will be happy to help you out getting started properly.
They should be able to set your bow up properly for you and your abilities.
Ordered it from a Pro-shop. It was a package and came set-up properly. I ordered 50/60 lbs pull. I thought they would ship it at 50. They shipped it at 60.
If you ordered the bow from some other source, STILL head to your local pro-shop and see if they will help you.......It's a good idea to develop a relationship with a shop that you can trust. It sounds like you will need some professional guidance with your new purchase.
Professional guidance??? I have a professional bow shooter living at the back of my property.
I think that will do. He offered to help me with my bow problems.
Zak,
I hope what you are describing is "Letting Down" the bowstring.......NEVER just let the string go at any point in the draw unless you are shooting an arrow at a good backstop. Even a half draw "Dry Fire" can damage your bows parts.
Yes, I was refering to "Letting Down". I just couldn't think of the name.
I'm going to give you some advice,and it's not meant to insult you in ANY way shape or form......
Thanks this advice helps a lot.
If you ordered the bow from a Pro-shop have the tech guys set you up properly for draw length/draw weight/arrows /accessories etc. Most shops that you buy a bow from will be happy to help you out getting started properly.
They should be able to set your bow up properly for you and your abilities.
Ordered it from a Pro-shop. It was a package and came set-up properly. I ordered 50/60 lbs pull. I thought they would ship it at 50. They shipped it at 60.
If you ordered the bow from some other source, STILL head to your local pro-shop and see if they will help you.......It's a good idea to develop a relationship with a shop that you can trust. It sounds like you will need some professional guidance with your new purchase.
Professional guidance??? I have a professional bow shooter living at the back of my property.
I think that will do. He offered to help me with my bow problems.
