Helpful hint (hopefully)
#1
Thread Starter
Join Date: Feb 2003
Location: Freehold NJ USA
Posts: 219
Helpful hint (hopefully)
Some of the screws on my sight, rest, etc were loosening up over time (usually at the worst time) and I found the following to be an easy, cheap fix:
I took some of that thin white teflon plummers tape (pipe tape) and wraped it once around the threaded end of each screw before tightening them down. They never back out or loosten but are still easily removed for tuning or maintenance.
I took some of that thin white teflon plummers tape (pipe tape) and wraped it once around the threaded end of each screw before tightening them down. They never back out or loosten but are still easily removed for tuning or maintenance.