HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   Razor Ring Broadheads (You gotta see this!!) (https://www.huntingnet.com/forum/bowhunting/34074-razor-ring-broadheads-you-gotta-see.html)

atlasman 07-27-2003 09:23 PM

Razor Ring Broadheads (You gotta see this!!)
 
http://www.razorring.com/

They say these things will put a hole the size of a 12 gauge slug.........I can' t even imagine how much KE would be required to do it ;)



[:o][:o][:o]

Tree climber 07-27-2003 09:41 PM

RE: Razor Ring Broadheads (You gotta see this!!)
 
I saw a demo on these blades last week,don' t know how much energy it would take.don' t know how they work,didn' t get a close up of the ring.they look good on the demo.they used a regular head and then the razor rings,there was only about 1" difference in penetration.

atlasman 07-27-2003 10:03 PM

RE: Razor Ring Broadheads (You gotta see this!!)
 

didn' t get a close up of the ring









Bowdaddy 07-27-2003 10:18 PM

RE: Razor Ring Broadheads (You gotta see this!!)
 
Where do you buy them from?
just curios!

5 shot 07-28-2003 03:38 AM

RE: Razor Ring Broadheads (You gotta see this!!)
 
I have not tested them, but from my understanding you need to shoot them from a shotgun to get enough KE to get them to pass through anything! I will let Antlereater take care of the rest. I believe he has used them on game.

Tazman 07-28-2003 06:30 AM

RE: Razor Ring Broadheads (You gotta see this!!)
 
My thoughts also 5 shot, you would have to have KE through the roof to get a pass through shot with those.

Trushot_archer 07-28-2003 08:16 AM

RE: Razor Ring Broadheads (You gotta see this!!)
 
If you have sucess hunting with the Razor ring, you might as well use judo points. :D

PABowhntr 07-28-2003 08:45 AM

RE: Razor Ring Broadheads (You gotta see this!!)
 
This sounds like a job for 5shot. The question being " just how much KE is required to get the Razor ring to function correctly?"

;)

Todd1700 07-28-2003 08:56 AM

RE: Razor Ring Broadheads (You gotta see this!!)
 
I posted under another thread about this thing that in my opinion it would need to be fired from the deck gun of a Russian whaling ship to get a pass through. If my bow were powerful enough to use this thing then I would just get some expandables with about a 2 inch cut instead. They would definately be more accurate and probably penetrate better.

Arrroman 07-28-2003 09:04 AM

RE: Razor Ring Broadheads (You gotta see this!!)
 
Proper shot placement and a very sharp broadhead is all that is really needed, I' ve been successful with the old two edge heads and will probably never change. Good luck hunting!


All times are GMT -8. The time now is 09:37 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.