setting up 3-D rig...
06-08-2003 | 08:22 PM
#4
Giant Nontypical
Joined: Feb 2003
Posts: 6,455
Likes: 0
From: Burleson TX USA
RE: setting up 3-D rig...
Sight = Spot Hogg Hogg-it sight with the 2" pin guard.
Rest = Muzzy ze rest minus the overdraw plate.
Arrows = Carbon express CXL 250' s.
Release = Trueball extreme with talon head
Hip quiver.
A good arrow puller
A bar of soap ( makes the arrows easier to pull )
Thats my set set up and so far so good
Rest = Muzzy ze rest minus the overdraw plate.
Arrows = Carbon express CXL 250' s.
Release = Trueball extreme with talon head
Hip quiver.
A good arrow puller
A bar of soap ( makes the arrows easier to pull )
Thats my set set up and so far so good
06-09-2003 | 06:33 AM
#5
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: setting up 3-D rig...
I do not have a " hardcore" 3D shooting setup with the microadjustable sight, foot long stabilizer, etc... but I do have a bow devoted, at the moment for that purpose. I have the following accessories installed:
Copper John Dead Nuts Hunter sight
Golden Key Futura Infinit arrow rest
Golden Key Futura Tranquilizer stabilizer
- with Sims regular stabilizer enhancer installed.
Beman ICS 340s
Trufire Surefire release
Hip quiver
Copper John Dead Nuts Hunter sight
Golden Key Futura Infinit arrow rest
Golden Key Futura Tranquilizer stabilizer
- with Sims regular stabilizer enhancer installed.
Beman ICS 340s
Trufire Surefire release
Hip quiver
06-09-2003 | 07:09 AM
#6
Typical Buck
Joined: Feb 2003
Posts: 567
Likes: 0
From: Buford GA USA
RE: setting up 3-D rig...
There are so many options out there it is almost limitless to configurations for a dedicated 3D bow. Having said that, here is my setup:
-03 Hoyt Ultratec, cam.5, XT2000 limbs, 65 #s
-Sureloc Challenger site
-HHA 4x lens and HHA scope (the scope and lens are from one of their optimizer series)
-Trophy Taker Shakey Hunter rest
-14 inch Doinker stabilizer
-Either Beman Matrix 360s or Easton ACC 3-49 arrows, depending on the mood, although I have been shooting the Matrix more lately since they are slightly larger in diameter.
-Hip Quiver
-Scott caliper release
-Power Arrow Gripper from Berry Game Products
-03 Hoyt Ultratec, cam.5, XT2000 limbs, 65 #s
-Sureloc Challenger site
-HHA 4x lens and HHA scope (the scope and lens are from one of their optimizer series)
-Trophy Taker Shakey Hunter rest
-14 inch Doinker stabilizer
-Either Beman Matrix 360s or Easton ACC 3-49 arrows, depending on the mood, although I have been shooting the Matrix more lately since they are slightly larger in diameter.
-Hip Quiver
-Scott caliper release
-Power Arrow Gripper from Berry Game Products
06-09-2003 | 09:05 AM
#7
Nontypical Buck
Joined: Feb 2003
Posts: 2,890
Likes: 0
From: WEST PALM FLORIDA
RE: setting up 3-D rig...
I have a trophy taker rest , toxonics sight , and shoot cabon express arrows out of my darton , works good for me , and I' ve seen several others with a trophy taker rest on their mavrics , its a good combo .
06-09-2003 | 08:05 PM
#9
Joined: Feb 2003
Posts: 232
Likes: 0
From: Havertown PA USA
RE: setting up 3-D rig...
I shoot in a bowhunters class with fix pins so my 3-d rig can be a hunting bow with minor changes.
Merlin Max 2000
HTM Ultimate Hunter site
Golden Key 3-D Rover rest
7" Shockblocher
Scott Mongoose release
String loop
Carbon Express 3-D selects
Merlin Max 2000
HTM Ultimate Hunter site
Golden Key 3-D Rover rest
7" Shockblocher
Scott Mongoose release
String loop
Carbon Express 3-D selects