![[Deleted]](https://www.huntingnet.com/forum/iconimages/bowhunting/deleted_ltr.gif)
[Deleted]
06-12-2008 | 08:06 PM
#2
Giant Nontypical
Joined: Dec 2005
Posts: 5,673
Likes: 0
From: Northeast Tennessee
RE: Whats the correct way to measure and change a string ?
Just cut the string off. You don't need a press.
LOL!
What do you need to measure it for. There should be specs on the bow, as to what string and cable length you need.
LOL!
What do you need to measure it for. There should be specs on the bow, as to what string and cable length you need.
06-12-2008 | 09:00 PM
#5
Nontypical Buck
Joined: Feb 2003
Posts: 3,318
Likes: 0
From: Norman OK USA
RE: Whats the correct way to measure and change a string ?
I tap a finish nail (or any nail with alittle to no head)into a board and pull the string tight. Then hook your tape on the nail head... and measure.
To change it... just put enought pressure on it to loosen the string and swap them out.
To change it... just put enought pressure on it to loosen the string and swap them out.
