|
RE: which broadhead????
My vote would be for a 100 grain cut on contact broadhead with that low poundage. If you wanted to shoot a muzzy i would try for a 75 or 85 grain head. In theory any sharp broadhead should work, but i would have more confidence in the penetrating ability of a cut on contact head.
|
RE: which broadhead????
id go lower than 100 grains if i were you
|
RE: which broadhead????
which BH would you choose if your DW was 54 and you DL was 25 |
RE: which broadhead????
weight is about 234 with out my 125 grain head, so about 359-360 with the head.
|
RE: which broadhead????
what about thunderheads????
|
RE: which broadhead????
I'd say a 100 grain cut on contact head will do the job easily. Even a cut on contact 125 grain broad head would be fine. Stick with a Cut On Contact 2 blade of some sort. Magnus makes some great 2 blade broad heads. There lifetime warranty also. Thats what I'd do.
|
RE: which broadhead????
^ thanks.
|
RE: which broadhead????
ORIGINAL: bigbulls Ditto, none of the above. I would choose either a cut on contact three blade with a cutting diameter of 1" or less or preferably a two blade cot on contact like the Magnus stinger, Eastman first cut, Steel Force, Sonic Pro, etc... etc... Afew others high up on the list would be Grizz Trick, Standard slick trick, NAP nitrons, Wasp BOSS bullet |
RE: which broadhead????
MX3 100's...newer head at .025 blades, much stronger, super sharp and fly well on a tuned bow. great heads. if you don't want to spend the extra dough then the standard 100's would be just fine, little thinner blades, but they are very good as well.
|
RE: which broadhead????
^ see i have just the regular's but there 125's, i havnt shot them out of my new bow that is why i am askin questions. tommorow i am gonna see how they shoot, and if not, i am gonna look around, thanks for the opinions everyone.
|
| All times are GMT -8. The time now is 02:45 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.