[Deleted]
#31
Ok I used this site http://www.thearcheryhut.com/calculators.php to figure out the specs.
if you use the Nitrous with the Vforce 350's at 370 grains 60# draw and 28" draw length 309 IBO (I find the lowest number on bowtech's IBO rating is the most accurate for this.) you should be getting 281 fps and 65 ftlbs of KE.
if you use the Nitrous with the Vforce 350's at 370 grains 60# draw and 28" draw length 309 IBO (I find the lowest number on bowtech's IBO rating is the most accurate for this.) you should be getting 281 fps and 65 ftlbs of KE.
#33
ORIGINAL: DropTine249
Im going to have to paly with setup a bit. Id like to hit the 300fps mark with my hunting setup
Im going to have to paly with setup a bit. Id like to hit the 300fps mark with my hunting setup
#36
Giant Nontypical
Joined: Dec 2005
Posts: 5,673
Likes: 0
From: Northeast Tennessee
I shoot the Victory VForce HV's, .350's. I shoot 28" from nock groove to insert rim w/ 3-60 uni bushings. They are 323gr. I shoot low poundage though, I'm going to be shooting 62lbs and getting 300fps. At a 27.5" to the back of the grip which can vary from a 28.5" to 29" AMO draw.
#40
Giant Nontypical
Joined: Dec 2005
Posts: 5,673
Likes: 0
From: Northeast Tennessee
ORIGINAL: DropTine249
Matt(username)...you too, though..why not
Matt(username)...you too, though..why not
It has an IBO of 330. With the Nitrous, you will be hard pressed to break the 300 mark. You lose 20 feet for your draw length. If you would have went with the Ally though



