HuntingNet.com Forums
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   what in the heck is wrong? (https://www.huntingnet.com/forum/bowhunting/235971-what-heck-wrong.html)

HOGHUNTINGUNLIMITED 03-05-2008 04:46 PM
RE: what in the heck is wrong?
 
ORIGINAL: PA Hardwoods

Can you take a picture of your center serving. That is what I think may be the culprit.
what part? is it where the little gold nocks are?

halfrack VIII 03-05-2008 04:52 PM
RE: what in the heck is wrong?
 
three things your biscuit isn't sitting right, your brass nock is probably sliding up and down, and your serving may be worn out, causing the arrow and the brass snock to slide like crazy

HOGHUNTINGUNLIMITED 03-05-2008 04:57 PM
RE: what in the heck is wrong?
 
yeah I need to get some bow wax on there but here is a picture of where I think your talking about!

youngbowhunter93 03-05-2008 05:01 PM
RE: what in the heck is wrong?
 
wisker dont look square and nocking pointseems to pretty high try working with those

HOGHUNTINGUNLIMITED 03-05-2008 05:04 PM
RE: what in the heck is wrong?
 
I know... but it seems like if that was it..it wouldn't all happen that quick!

kb777 03-05-2008 05:06 PM
RE: what in the heck is wrong?
 
wow,yea it looks like its moving around, wax that bitch and get a loop for that release


Washington Hunter 03-05-2008 05:08 PM
RE: what in the heck is wrong?
 
ORIGINAL: HOGHUNTINGUNLIMITED

I know... but it seems like if that was it..it wouldn't all happen that quick!
You've just been introduced to Murphy's Law.

If it can go wrong, it will.

Things do happen that quick, which is likely what happened here. Your rest and nocking point aren't square; not even close.

Either the rest is loose and slipped down or your nock/serving slipped up. In either case, thats whats causing it. Throw it in a vise, square everything up, loc-tite the rest, and crimp those brass nocks down as tight as you can get them.

HOGHUNTINGUNLIMITED 03-05-2008 05:09 PM
RE: what in the heck is wrong?
 
ORIGINAL: kb777

wow,yea it looks like its moving around, wax that bitch and get a loop for that release
I would get a loop but the archery shop owner says that you lose a little bit of draw length and that slows your bow up a little to so is that true?

HOGHUNTINGUNLIMITED 03-05-2008 05:11 PM
RE: what in the heck is wrong?
 
ORIGINAL: Washington Hunter

ORIGINAL: HOGHUNTINGUNLIMITED

I know... but it seems like if that was it..it wouldn't all happen that quick!
You've just been introduced to Murphy's Law.

If it can go wrong, it will.

Things do happen that quick, which is likely what happened here. Your rest and nocking point aren't square; not even close.

Either the rest is loose and slipped down or your nock/serving slipped up. In either case, thats whats causing it. Throw it in a vise, square everything up, loc-tite the rest, and crimp those brass nocks down as tight as you can get them.
yeah ok I will try to bring it into the pro shop SOON!

HOGHUNTINGUNLIMITED 03-05-2008 05:22 PM
RE: what in the heck is wrong?
 
I think I got it! the whole string is moving upward... and fast!!!!


All times are GMT -8. The time now is 12:01 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.