what in the heck is wrong?
 

I was shooting today and noticed I was shooting a little low at 20 yards so I moved the pin down so I would shoot good again...well it worked for about 5 shots and then it shot low again and I reajusted it again... shooting good. get my arrows go back and shoot again and now I can't go down any more with my 20 yard pin so I put the 30 yard pin on it and shot good but guess what happend after 5 or6 shots? it did it again... so here is a picture I hope you know what is wrong here! the arrow was perfectly levela week ago.

RE: what in the heck is wrong?
 

Are your brass nocks as tight as you can get them? They look like they're sitting awfully high to me. Is there a chance they may have slid up the serving?

RE: what in the heck is wrong?
 

brass nocks moving on you?

edit: beaten by 39 seconds

RE: what in the heck is wrong?
 

Brass nocks moving up....maybe WB is loose and sliding down. It doesnt appear to be very square in that photo.

RE: what in the heck is wrong?
 

I checked that and they are not the bottom one is a little but I don't think that would do anything!

RE: what in the heck is wrong?
 

Wisker Buisquit is not square and it looks like you are WAY nock high. Almost sounds like maybe your center serving is slipping. Notice any serving seperation on your center serving?

RE: what in the heck is wrong?
 

no it is not that either I tried to move it and tightin the screws down but they are as tight as they will get. yeah it is not the streightest but it is tight!

RE: what in the heck is wrong?
 

Can you take a picture of your center serving. That is what I think may be the culprit.

RE: what in the heck is wrong?
 

doesn't seem to be. I had this happen a few weeks back to but it was not this bad!

RE: what in the heck is wrong?
 

It has all the signs of center serving slipping. Does it have the nylon (almost plastic looking serving)?

RE: what in the heck is wrong?
 

what part? is it where the little gold nocks are?

RE: what in the heck is wrong?
 

three things your biscuit isn't sitting right, your brass nock is probably sliding up and down, and your serving may be worn out, causing the arrow and the brass snock to slide like crazy

RE: what in the heck is wrong?
 

yeah I need to get some bow wax on there but here is a picture of where I think your talking about!

RE: what in the heck is wrong?
 

wisker dont look square and nocking pointseems to pretty high try working with those

RE: what in the heck is wrong?
 

I know... but it seems like if that was it..it wouldn't all happen that quick!

RE: what in the heck is wrong?
 

wow,yea it looks like its moving around, wax that bitch and get a loop for that release

RE: what in the heck is wrong?
 

You've just been introduced to Murphy's Law.

If it can go wrong, it will.

Things do happen that quick, which is likely what happened here. Your rest and nocking point aren't square; not even close.

Either the rest is loose and slipped down or your nock/serving slipped up. In either case, thats whats causing it. Throw it in a vise, square everything up, loc-tite the rest, and crimp those brass nocks down as tight as you can get them.

RE: what in the heck is wrong?
 

I would get a loop but the archery shop owner says that you lose a little bit of draw length and that slows your bow up a little to so is that true?

RE: what in the heck is wrong?
 

yeah ok I will try to bring it into the pro shop SOON!

RE: what in the heck is wrong?
 

I think I got it! the whole string is moving upward... and fast!!!!

RE: what in the heck is wrong?
 

it looks like th nock is to high...goin by the rest holes

RE: what in the heck is wrong?
 

i think somethings not as level as it should be. my friend used to have the same problem. we checked, nothing was level enough, we took everything off, put it back on much better, and more careful. shoots great now

RE: what in the heck is wrong?
 

well I called Dan... the archery shop owner! and he said that it is the little gold nocks on there. thanks again guys!

John

RE: what in the heck is wrong?
 

Id re align your WB while your at it. No reason to not have it square for optimum performance.

RE: what in the heck is wrong?
 

yeah I will have that done to!

Thanks
John