How many of you notice a huge difference in shootingyour field points compared tofixed blade BH?? Mine are completely different, someone told me that they fly the same if your bow is tuned, I don't think they are right..

I think they are right.

I think they are right.

I'm gonna tell ya about a great bow. That Allegiance that Buckmaster now has......was set up ONE time.

I could shoot ANYTHING.......I mena any tipped arrow....and it was perfect. I even switched between arrow diameters, weights, etc......FP's, BH's ....even different weight BH's.

THAT BOW was tuned perfectly. It was awesome.

I know that when I shoot a field point it flies to the left and low, about 4-5" . BH is on. I wish I could shoot field points, it would be much easier on my targets during the "off season".

VA, What kind of broadhead are you shooting?

I tune for FP's and THEN shoot BH's....but I suppose you could do it either way. SInce switching to the Rage 2 blade....I've never had to worry. I didn't before with the Ally.....but I DID experience the issues you describe with my old bow. I had to tune to one or the other (FP's or BH's).

There isn't much difference in how mine shoot

What kind of BH's and what range?
.....and.....
Are you sure your bow is tuned "perfectly" (or very close to it)?

Some folks are lucky enough and some aren't! Your bow can be tuned perfectly and the 2 will fly different. All this bow tuning stuff is getting carried away on here. Sometimes it depends on what type of BH your using. Mine fly real close to the same out of my recurve but I still practice with my BH's during the hunting season so I know there flying good and going where I'm aiming.

It has more to do with your arrow than the bow. In order to get your field tipped arrows to hit the same as your fixed blade arrows you need to be pretty close on spine. If not you will play heck trying to get them close and will most likely actually throw your tune off trying to do it.

If you set your bow up and tune it with field points to the best of your ability, then shoot fixed blades and they are several inches off and fly funky you can try broad tuning. However when you do this if you have to move your rest or nocking point farther than what you know you should have to then you probably have a spine issue. Try messing with the draw weight of your bow to see if it changes.

If you simply can't group fixed blade arrows it may be an arrow issue. Like your arrows are warped or the nocks are off/bad or the inserts are not square and your heads do not spin true.

Fetching contact can cause it as well.

Me personally I don't try to get my fixed blades to hit exactly where my field points do. If they are within a few inches I am happy. As long as they still group well. I shoot my bow at targets WAY more than I actually hunt with it. And when I do hunt with it I take shots that are close.

I tune with bareshafts and like to get them to impact with my fletched arrows at least out to 20 yards, but I prefer 30 yards. If I can accomplish this I am fairly confident my bow is tuned pretty well for that arrow and my spine is pretty close as well. Now if I screw on a fixed blade head and I shoot an inch or two off the mark I'm not going to throw a fit or go re adjusting my bow. Especially if the broad head arrows still group well. I can either change my sights my sights when I hunt or just compensate for it. I am more concerned with how the arrow flies, not that two differently configured arrows impact in different spots.

Lots of fletching and FOC seems to help with this as well.

The best broad head tipped arrows I have shot were the Nitro Stingers that are tapered and have decent FOC from the get go. These were very easy to broad head tune, even though they were pretty stiff spine wise for my bow.

This is my view anyway, many do not agree with it. To each his own I guess.

Paul