Ok I need someone help who has a wealth of bowtech draw length, draw stop etc. knowledge to possibly shoot me a pm, a Phone number would be great, im in a little predicament that should be easily answered but after sitting in a bowshop for 2.5 hrs. and coming out with hardly nothin im a little distraught...

What's up young man. Sorry, I just got done going through my PM's and I'll answer yours here vs PM.

Your 07 Allegiance has draw modules which you can replace. You can order the correct mod, either speed or smooth to your specific draw length.

Rob, let me know if you don't have access to the '07 mod chart...

the Ally had a ESM 2.5 It was too long. I shoot a 27.5" I THINK 85% sure but still. So i go to the bow shop to get her set up, great guy but didnt know what module was what so we go trial and error... final after making the drawlength longer and then slightly shorter he sent me on my way at no charge with a ESM 3 said it looked like it fit me pretty good.... wouldnt this be a 28.5" module? If i shot 27.5 with my element wouldnt i shoot 27.5 with the Ally? What mod do i need??

And to further the detail everytime he played with the draw stopi got 0% let off.or all letoff and the string back to my ear[:@][:@]

Aaron, what draw length do you need?

27.5" I think. im almost positive.... i measure by elemnt according to the ASA draw length chart and it was 27.5, exactly what i remember the guy at the shop telling me when i bought the bow.

I drew the bow back with my release and arrow and the arrow fell pull off the riser.

He needs ESM 4's, Rob.

At least to be shooting what his Element previously was.

Draw stop set at 5.3, I believe.

Dan is spot on! Nice Dan.

Those are the correct numbers

Dan

Sold a lot of Bowtechs in 10 months...