Rob, Greg, anybody with bowtech knowledge.
 

Ok I need someone help who has a wealth of bowtech draw length, draw stop etc. knowledge to possibly shoot me a pm, a Phone number would be great, im in a little predicament that should be easily answered but after sitting in a bowshop for 2.5 hrs. and coming out with hardly nothin im a little distraught...

RE: Rob, Greg, anybody with bowtech knowledge.
 

What's up young man. Sorry, I just got done going through my PM's and I'll answer yours here vs PM.

Your 07 Allegiance has draw modules which you can replace. You can order the correct mod, either speed or smooth to your specific draw length.

RE: Rob, Greg, anybody with bowtech knowledge.
 

Rob, let me know if you don't have access to the '07 mod chart...

RE: Rob, Greg, anybody with bowtech knowledge.
 

the Ally had a ESM 2.5 It was too long. I shoot a 27.5" I THINK 85% sure but still. So i go to the bow shop to get her set up, great guy but didnt know what module was what so we go trial and error... final after making the drawlength longer and then slightly shorter he sent me on my way at no charge with a ESM 3 said it looked like it fit me pretty good.... wouldnt this be a 28.5" module? If i shot 27.5 with my element wouldnt i shoot 27.5 with the Ally? What mod do i need??

And to further the detail everytime he played with the draw stopi got 0% let off.:eek:or all letoff and the string back to my ear:eek:[:@][:@]

RE: Rob, Greg, anybody with bowtech knowledge.
 

Aaron, what draw length do you need?

RE: Rob, Greg, anybody with bowtech knowledge.
 

27.5" I think. im almost positive.... i measure by elemnt according to the ASA draw length chart and it was 27.5, exactly what i remember the guy at the shop telling me when i bought the bow.

I drew the bow back with my release and arrow and the arrow fell pull off the riser.

RE: Rob, Greg, anybody with bowtech knowledge.
 

He needs ESM 4's, Rob.

At least to be shooting what his Element previously was.

Draw stop set at 5.3, I believe.

RE: Rob, Greg, anybody with bowtech knowledge.
 

Dan is spot on! Nice Dan.

RE: Rob, Greg, anybody with bowtech knowledge.
 

Those are the correct numbers;)

Dan

RE: Rob, Greg, anybody with bowtech knowledge.
 

Sold a lot of Bowtechs in 10 months... ;)

RE: Rob, Greg, anybody with bowtech knowledge.
 

Aaron, Jeff's bow is at 29" right now with the ESM 2.5 module in it. Put the draw stop back at 6.8

RE: Rob, Greg, anybody with bowtech knowledge.
 

Probably because he worked at a shop that kept their mod chart around, LOL... amazing that you went to one that didn't have one handy, buck...

Rob'll get you all squared away though! :)

RE: Rob, Greg, anybody with bowtech knowledge.
 

Thanks guys. Now Il tell him what i need instead of trying to get him to tell me, I just hope im right about the 27.5" My arrows from end of nock to end of point only 26.5" Does that sound like the shooter of a 27.5" DL

RE: Rob, Greg, anybody with bowtech knowledge.
 

I left the shop with 3's installed...

RE: Rob, Greg, anybody with bowtech knowledge.
 

6.3 in that case.

RE: Rob, Greg, anybody with bowtech knowledge.
 

Correct, you bow is now a 28.5" draw with that mod and stop.

RE: Rob, Greg, anybody with bowtech knowledge.
 

Yep i must deff. be a 27.5.... arrow fell off the riser. I believe i could do this myself if i had the modules:eek:

I bolted a rest on and it barely stayed on the rest by mabey the length of the field tip

I must say it dont feel bad though... but if i was 27.5 before thats probably what i should stick with right?

RE: Rob, Greg, anybody with bowtech knowledge.
 

It's better to be short than long Aaron. You'll shoot it much better at 27.5" for sure.

RE: Rob, Greg, anybody with bowtech knowledge.
 

I guess that does it guys, Thanks! Where would i be without yall.... well for one i wouldnt have a bowtech[&:]... but anyway thanks to all via thread and PM.