Will he make P&Y?
01-06-2008 | 07:11 AM
#24
Nontypical Buck
Joined: Feb 2007
Posts: 1,161
Likes: 0
From: Milwaukee WI
RE: Will he make P&Y?
ORIGINAL: Red Boar
Easily...as a 10 point, you have the extra tine, added beam length and extra circumference measurement over a similar sized 8. Brow tines are pretty nice too. I'd say mid to low 130's.
Good luck.
Easily...as a 10 point, you have the extra tine, added beam length and extra circumference measurement over a similar sized 8. Brow tines are pretty nice too. I'd say mid to low 130's.
Good luck.
Buckeye, wanna chime in on this?
01-06-2008 | 07:29 AM
#25
Giant Nontypical
Joined: Sep 2005
Posts: 7,368
Likes: 0
From: Mont County, Pa
RE: Will he make P&Y?
ORIGINAL: Hoytail Hunter
What? I thought that all bucks regardlessif he's a fork or a 16 pointerget a standard 4 mass measurements?
Buckeye, wanna chime in on this?
ORIGINAL: Red Boar
Easily...as a 10 point, you have the extra tine, added beam length and extra circumference measurement over a similar sized 8. Brow tines are pretty nice too. I'd say mid to low 130's. Good luck.
Easily...as a 10 point, you have the extra tine, added beam length and extra circumference measurement over a similar sized 8. Brow tines are pretty nice too. I'd say mid to low 130's.
Good luck.
Buckeye, wanna chime in on this?
01-06-2008 | 07:33 AM
#26
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: Will he make P&Y?
ORIGINAL: Hoytail Hunter
What? I thought that all bucks regardlessif he's a fork or a 16 pointerget a standard 4 mass measurements?
Buckeye, wanna chime in on this?
ORIGINAL: Red Boar
Easily...as a 10 point, you have the extra tine, added beam length and extra circumference measurement over a similar sized 8. Brow tines are pretty nice too. I'd say mid to low 130's. Good luck.
Easily...as a 10 point, you have the extra tine, added beam length and extra circumference measurement over a similar sized 8. Brow tines are pretty nice too. I'd say mid to low 130's.
Good luck.
Buckeye, wanna chime in on this?
Dan
01-06-2008 | 07:41 AM
#27
Nontypical Buck
Joined: Jul 2006
Posts: 4,487
Likes: 0
From: St. Louis, MO
RE: Will he make P&Y?
I would bet he makes it with a few inches to spare.
And he has a built in target in the first pic. Hit him in that bare spot and you might just see him fall over. Good luck getting him.
And he has a built in target in the first pic. Hit him in that bare spot and you might just see him fall over. Good luck getting him.
01-06-2008 | 07:57 AM
#28
Site Buck Guru
Joined: Dec 2005
Posts: 5,922
Likes: 0
From: Racine, Wisconsin
RE: Will he make P&Y?
All deer get 4 mass measurements. 10 pointers will get 1-2 inches more from the h-4 measurements because antlers are thicker between tines then they are half way to the tip of the beam. 10 pointers of similar size to an 8 pointer usually have 6-10 inches more depending on the length of the g-4s.
What looks more impressive..... a 150 8 point or a 150 10 point?
What looks more impressive..... a 150 8 point or a 150 10 point?
01-06-2008 | 08:00 AM
#29
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: Will he make P&Y?
ORIGINAL: GregH
All deer get 4 mass measurements. 10 pointers will get 1-2 inches more from the h-4 measurements because antlers are thicker between tines then they are half way to the tip of the beam. 10 pointers of similar size to an 8 pointer usually have 6-10 inches more depending on the length of the g-4s.
What looks more impressive..... a 150 8 point or a 150 10 point?
All deer get 4 mass measurements. 10 pointers will get 1-2 inches more from the h-4 measurements because antlers are thicker between tines then they are half way to the tip of the beam. 10 pointers of similar size to an 8 pointer usually have 6-10 inches more depending on the length of the g-4s.
What looks more impressive..... a 150 8 point or a 150 10 point?
Dan
Thread
Thread Starter
Forum
Replies
Last Post
RugerM77.270
Whitetail Deer Hunting
1
11-28-2007 09:47 AM
