are these broadheads ok for a 50lb pull bow
 

im using rage 3 blade mechanicals

RE: are these broadheads ok for a 50lb pull bow
 

im shooting deer do you think they will kill 1

RE: are these broadheads ok for a 50lb pull bow
 

50 lb will kill any deer with a sharp broadhead. If you are worried I would say to use any type of cut on contact head. Or a two blade cut on contact.;)

RE: are these broadheads ok for a 50lb pull bow
 

Im pulling 50 right on the dot and im using 3 blade and they shoot great but their not mechanicals

RE: are these broadheads ok for a 50lb pull bow
 

I don't know why you would pick mechanical broadhead if you are only shooting at 50#. I think they willkill deerbut they won't penatrate and get passthroughs as good as a COC broadhead. A COC broadheads would be better for your set up.

RE: are these broadheads ok for a 50lb pull bow
 

NO!!! Too light a pull for a mechanical. Get over it. Get you a nice sharp fixed head and do it. Even the manufacturers say 55 pounds as a minimum I think. I've always felt 60 was a safe place to start at. Don't even think of mechanicals.

RE: are these broadheads ok for a 50lb pull bow
 

Depends on what kind of kinetic energy you are producing.

RE: are these broadheads ok for a 50lb pull bow
 

Go with the 2 blade.

RE: are these broadheads ok for a 50lb pull bow
 

i have heard of people using the rage broadheads with poundage in the high 40's and having great success with them.

RE: are these broadheads ok for a 50lb pull bow
 

No, you just don't have enough KE. Yes they will kill under ideal conditons, but why take any chances? use a head that will provide you with the best chance for success, and that in my opinion would be a good low profile fixed blade heads.
www.broadheadtests.com