whats my problem???
 

I have a crazy problem with my arrows. I just got back some easton axis FMJ's fletched w/ blazer vanes. I went out shooting them today (hopeing I get to sight in my new summit hot dot) but after I shoot a few 3 times the blazer vanes came flying off the arrows some where down range.this is me-->[:@][:'(][>:][>:][&:][&:]?????

I have a newwisker buisket rest and the summit sight on a mathews switchbackXT, what is is thats makeing this happen???
My archery shop dealer just re-paper tuned the bow for me about 3 days beforetoday (the day I droped off the arrows).

What happened???

RE: whats my problem???
 

Probably the whisker biscuit. Its infamous for doing that.

RE: whats my problem???
 

If you use the correct glue and fletch them properly a WB will not rip off vanes.

RE: whats my problem???
 

I havenbt had a problem with my vanes and my whisker biscuit!

RE: whats my problem???
 

Proper glue and drying time won't allow a correctly installed wb to rip off the blazers. There must be more to this story.

RE: whats my problem???
 

I supose one of those drop aways would fix that right?? Ive seen a cobra double diamond that looked okay. there is one at the archery shop I go to that has fancy prongs and mounting holes stacked right on top of each other. I dont remember the brand though.

Please advise here.

RE: whats my problem???
 

Arjuna: what else could cause this?

Just to help rule out things, Im not messeing with the vanes or bending them w/ the fingers. that could mess up the glues hold.

RE: whats my problem???
 

I'd almost have to think by the sound of it that the sahfts weren't cleaned properly prior to fletching. If the shaft is cleaned as it should be, if the gluing surface of the vanes are clean, and the leading edge is spot-glued then there is little chance of the vanes coming off just from shooting them.

RE: whats my problem???
 

Bingo, thats what I think as well.

RE: whats my problem???
 

hasn't happened to me and my WB