Cobra sidewinder Sur-Loc
06-18-2007, 12:39 PM
#1
Thread Starter
Join Date: May 2007
Location: McDonald, PA
Posts: 158
Cobra sidewinder Sur-Loc
I have the sidewinder sur loc and I was wondering if anyone had any suggestions on how to quiet this thing down. I have tried the little limb savers and that didnt help much. I took it off my bow and started using my old sight because I couldnt quiet it down. It sounds like a tuning fork. I hate the fact that I dropped $140.00 on a sight that is just sitting on the top of my dresser collecting dust.
06-18-2007, 12:55 PM
#3
Nontypical Buck
Join Date: Dec 2005
Location: Burke, VA (raised in MD)
Posts: 1,096
RE: Cobra sidewinder Sur-Loc
My sure-loc isquiet as is. Where/what is the optic cover? Maybe mine is not installed.
Silly question(s): Are your knobs/screws tight? Is the bow tuned/quiet otherwise?
Silly question(s): Are your knobs/screws tight? Is the bow tuned/quiet otherwise?
06-18-2007, 01:17 PM
#4
Join Date: Feb 2007
Location:
Posts: 469
RE: Cobra sidewinder Sur-Loc
Mine is Quiet! check all screws, etc.
May be the fiber optics in the clear housing. IF that is
the case take off thetop and put something down theside
between the fiber and the inside wall of the clear housing.
Kind of like quieting down a vent in your truck.
But if you have to do that I would take it back or call
COBRA.
May be the fiber optics in the clear housing. IF that is
the case take off thetop and put something down theside
between the fiber and the inside wall of the clear housing.
Kind of like quieting down a vent in your truck.
But if you have to do that I would take it back or call
COBRA.
06-18-2007, 01:24 PM
#6
Thread Starter
Join Date: May 2007
Location: McDonald, PA
Posts: 158
RE: Cobra sidewinder Sur-Loc
ORIGINAL: Huntm Up
Are you leaving the optic cover on? Take it off if so, mine is quite as a mouse pissing on cotton.
Are you leaving the optic cover on? Take it off if so, mine is quite as a mouse pissing on cotton.
06-18-2007, 05:03 PM
#7
Join Date: Feb 2007
Location:
Posts: 469
RE: Cobra sidewinder Sur-Loc
I believe the cover he is referring to is the black clip on cover to go over the clear fiber cover. The clear cover stays on all of the time. The black plastic cover just snaps over the clear cover. If your clearcover is showing you do not have this black cover on.
You would know it anyway if you did. Blocks your fiber optic coils.
You would know it anyway if you did. Blocks your fiber optic coils.
06-18-2007, 08:09 PM
#10
Join Date: Feb 2007
Location:
Posts: 469
RE: Cobra sidewinder Sur-Loc
ORIGINAL: Archeryman101
Duct tape it! Duct tape fixes anything.
Mexicans I work with can fix anything with duct tape!
Duct tape it! Duct tape fixes anything.
Mexicans I work with can fix anything with duct tape!
Now that you mention it I do not see a lot ofMexican Bowhunters.