Please help outback bow
 

I bought a used outback and I noticed on the cam where you can change the draw lenght from 29 to 291/2 the bolt with the rubber spacer that the bolt doesn't come out flush on the other side of the cam. I would say it is inside about 3/16 of an inch. Is this normal or should I get it checked out. If you can help I would appreciate it very much

RE: Please help outback bow
 

When in doubt, check it out. ;)

RE: Please help outback bow
 

get it checked, It could have been like that for years but it should be rapaired

RE: Please help outback bow
 

You can't change the draw length on a Mathews Outback without completely changing the cam.The Outback dosen't offer adjustable draw length.

RE: Please help outback bow
 

Yes it does, but you go from 65% let off to 80%.

RE: Please help outback bow
 

get it checked becuase it could mess up the cam worst if you dont.

RE: Please help outback bow
 

Thanks for the help and I did get it checked and there is know problem with it it's the way it should be. Yes you can change the draw lenght by 1/2 inch on the outback which is a nice feature for the bow. Thanks for your help and reply's.