RE: best expandable broadhead in you opinion
 

they`re illeagal in mn. as well,but if they were I would still use nap spitfires

RE: best expandable broadhead in you opinion
 

NAP Spitfires!

RE: best expandable broadhead in you opinion
 

I would be real nervous about shooting a mechanical broadhead with a 56 pound bow. Do you know what kind of Kinetic Engergy you have with that setup? If it's less than 60 lbs KE I would stick with a fixed blade to be safe.

If you are going to shoot a mechanical with that bow I'd pick a 1 1/4" head. Stay away from the 2" cut because you won't get good penetration.

RE: best expandable broadhead in you opinion
 

I shoot some from Gold tip, not sure what they are called but they are cheap you can pick them up on ebay for about $10-$12 for 3.

RE: best expandable broadhead in you opinion
 

Here is another vote for the two blade Snypers, especially at your draw weight. They have a cut to the tip design and the blades slide rearward instead of camming open like most heads so the blades deploy quite easily.

RE: best expandable broadhead in you opinion
 

I shoot and love the Innerloc EXP 100 3 blade. This boardhead has two cutting di, just by flipping the collar.

RE: best expandable broadhead in you opinion
 

At 56 lbs I would stick with a cut on contact,fixed blade broadhead.

RE: best expandable broadhead in you opinion
 

I shoot the 100 grain spitfires but there is something to be said about the rage expanables. I have a couple family members that shoot them and they look to work pretty darn good.

RE: best expandable broadhead in you opinion
 

After plugging Snypers, At 56 pounds I agree with the above and ask you to stay with a quality fixed blade head.

RE: best expandable broadhead in you opinion
 

No denying that the fixed blade works on every setup, but I'll add here that my local pro shop sells more Snypers than any other mech head they stock. Theyreadily endorsethem for guys wanting to shoot mechanicals because theypenetrate well due to how theblades deploy, even on lower poundage setups. When a guy with a low poundage setup goes in the shop looking for a mech head, they always steer the buyer towards the Snyper because they work.

My intent here is not to stir up the whole fixed/mech hornets nest, but to provide some additional insight.