HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   HHA sight owners (https://www.huntingnet.com/forum/bowhunting/154478-hha-sight-owners.html)

minnesotahunter 08-31-2006 11:54 PM

HHA sight owners
 
Stupid question, but how do you attach the quiver bracket with these sights installed? I've got the 5500 (I think) with a slide, which doesn't allow me to attachthe piece that holds the quiver.

I didn't see any additional bolts, etc in the package. Am I missing something?

Idaho hunter 58 09-01-2006 12:07 AM

RE: HHA sight owners
 
when i opened this up i thought you had a post making fun of people who shoot with sights, hmm that is what i get for speed reading posts, but anyways can you overlap your quiver and sight, or is there another bolt hole next to the sight hole? what kind of bow do you shoot?

minnesotahunter 09-01-2006 12:12 AM

RE: HHA sight owners
 
Idaho, the bow is a Hoyt UltraSport. I tried to mount the quiver over the sight, but the sight slide pushes it out too far. I'm wondering if I need to get longer bolts, or some kind of additional hardware for this. Ha, the stupid thing is I've had the sight on the bow for months, I just haven't usedthe quiver, and didn't realize this was a problem for my setup until tonight.

bullmoose38 09-01-2006 07:05 AM

RE: HHA sight owners
 
You need longer bolts. It also wouldnt hurt to put spacers over the bolts.

statjunk 09-01-2006 07:08 AM

RE: HHA sight owners
 
They sell a piece of plastic that extends the side of your sight and gives you a mount position. My bow shop had it and they gave it to me free. I guess it is relative though since I spend good money there.

Tom

BGfisher 09-01-2006 07:13 AM

RE: HHA sight owners
 
I shoot the OL-5000. It's very similar to the 5500. The package should have come with two longer screws and two pieces of "pipe" about 3/4" long to offset the quiver. If ya didn't get them you could get a couple at the local hardware store; 1/8" inside diameter. The screws are 10X24 and the appropriate length (about 1 1/4").

I'm trying to think of what they are called and nothing is tweaking my brain. They are really a split pin made from steel.

minnesotahunter 09-01-2006 07:38 AM

RE: HHA sight owners
 
Thanks guys. When I bought the sight, I bought a display model. They shop gave it to me at a deal since they had now others in stock. This would explain why I didn't get that other hardware I guess.

Thanks again for the help.


All times are GMT -8. The time now is 04:15 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.