Yellow Jacket Target Question
#6
Thread Starter
Typical Buck
Joined: Feb 2003
Posts: 718
Likes: 0
From: Arlington WA USA
Thanks guys.
If paint workd then the circles I cut out last yeae that we attached to our old foam target with rubber cement should work till I get to town for paint.
If paint workd then the circles I cut out last yeae that we attached to our old foam target with rubber cement should work till I get to town for paint.
#7
Joined: Dec 2005
Posts: 319
Likes: 0
From: Kalaheo Hi.
I used to use orange paint as the vitals and an outline of a small deer /goats body around it . But last week I glued on a jack playing card for fun , just to try something different
#8
The paint trick sounds like a good one, but if your in a pinch I just used small squares of masking tape say 1"x1". Once I stepped down range I made them into small crosses.
This way I could move my "spot" all over the face of the target without cluttering it up with multiple spots and ithelped prevent shooting out one spot.
This way I could move my "spot" all over the face of the target without cluttering it up with multiple spots and ithelped prevent shooting out one spot.
#9
Cut the bottom out of a cheap plastic drinking glass . Press it tight against the target and spray paint with Orange Florescent paint . It makes dots just under 2" in diameter . ( note - when you do the painting , have the target on its back ) .




