mechanical broadheads
 

I have been fighting w/ mygroups w/ fixed blade broadheads and I am considering mechanical broadheads. This is something I swore I would never do as I had heard all the stories. My pro shop owner says it all he uses and I talked w/ another person at a different archery shop who insisted that if you take ethical shots they work perfect-he was using spitfires. I have shot the spitfire turkey broadheads w/ good results out of my bow. Any thoughts from people w/ personal experience would be appreciated. Also, what about practice w/ the mechanicals and maintaining shop blades?

RE: mechanical broadheads
 

I have used Spitfies and NEVER had any problems putting down deer. I'm sure yourshooting with theappropriate poundage on your bow for mechanicals. The only thing that sucks about spitfires is practicing. They will break if you shoot them a lot and the practicebroadheadtips don't fly like theactualmechanicals

RE: mechanical broadheads
 

I have shot several deer with spitfires. They perform well.

RE: mechanical broadheads
 

A couple suggestions.......

1. Keep trying to figure out your current bow tune. It could be an arrow spine issue, rest tune, or a variety of other things that can also affect the on game performance of mechanical heads. (Knowledge is power)

2. Familiarize yourself with the different styles and their strengths and weaknesses, as well as which ones will compliment your set-up and it's performance and the game you are hunting. They aren't one size fits all and there will definitely be choices that are better than others.

3. When in doubt, err on the conservative side in cutting diameter and rearward opening blade styles.

4. Consider one of the many new short body, highly aerodynamic fixed blade heads on the market, such as the Slick Tricks, Shuttle T Locks, Rocky Mt. Turbo, NAP Nitron, etc.
I have found them to be highly forgiving and if they shoot as well as a comparable sized mechanical head then you gain no advantage by shooting a mech.

I personally only shoot mechanicals when they give me something a fixed head cannot, such as a very large cutting diameter to use out of a high energy bow. Never use them as a band-aid to not knowing why your fixed heads aren't flying true.

RE: mechanical broadheads
 

I perfectly placed mech. is better than a poorly placed fixed head. BUT it seems that if you can't get fixed to fly straight and group well, than there is an under-lying problem with either form of bow set-up! Mech. heads shouldn't be used as a band-aid to fix the problem!

RE: mechanical broadheads
 

I have used spitfires for years with out a glitch their testimony is proven through the many photo post I have put up in the past couple of years. But understand I woulden't know how they perform on poorly placed shots as I only take only percent shots (brodside or quartering away) and I keep all my shots under 30 yards if I want to shoot 40,50,60 yards I get a shotgun to me thats what bow hunting is all about but to each their own. I say go for it as stated earlier you get a bigger cutting diamater and if you keep your shots at a reasonable didtance you get a pass through 2 big holes=quick bleed out.

RE: mechanical broadheads
 

Look at the new Rage broadheads. They open from the rear so you have no deflection and they come with a full practice head so you don't have to shoot 1 of your hunting heads. Go to www.ragebroadheads.com

RE: mechanical broadheads
 

Kansaswide.... you didn't give us enough information about your set up and arrows. What kind of weight and arrow are you shooting. Quite often the arrow is the problem. If you're set up is marginal the mechanical may not be for you. The fact that you can't get the broadhead to fly means something is not in tune or is the wrong choice of equipment..whether it's arrows, broadheads or whatever. We really need more info, such as what type of problem are you having? Sorry I can't give you an opinion without more info. A mechanical is NOT a cure for something else being wrong.

RE: mechanical broadheads
 

One of the best statements ever made on Hunting.net I have read!!!!

RE: mechanical broadheads
 

my setup is matthews ovation @ 65# & 31.5" 300cx w/125 field points. I have been shooting 125 thunderheads & I started trying 100 muzzies this week thinking maybe the shaft might be a little light for the 125s. I see little to no difference in the 125s & 100s @ 20yds which is what i am working on for the spring bear hunt I will be on. My impact point w/fieldpoints is dead on. With the broadheads it is about 3" right & a little low. I could adjust sights to compensate, but it just seems to me like you should be able to set on dead on for both field points & broadheads. I always have in the past.