I wanna start cresting
 

I'm thinking about giving custom arrow cresting a try.

Anybody into this and have any suggestions?

Bohning has a "starter kit" for about $130 bucks. Anybody have any thoughts on this kit?

RE: I wanna start cresting
 

Do a search on here there have been a lot of guys who have been spray cresting their arrows.

RE: I wanna start cresting
 

whats cresting??

RE: I wanna start cresting
 

hey, if you shoot carbon arrows Blackhawk makes a shaft with cresting in the shaft . won't scratch or peel. comes- camo , black ,and i think wood finish too. i saw 2 types a white crest and flames also.

RE: I wanna start cresting
 

Whitecloudhuter,,

A crest is on the end of the arrow under the fletching, they have ones that u can buy that are self-adhesive, but as Ausie said some actully use spray paint to add a crest of the end of their arrows,, which i have done and is faily easy to do

i would start off by doing a search on here, but basicallly all u need to do is,,

Go to wal-mart or a hardware store and purchase a can of Rust-o-leum specialty lacquer and maybe some masking tape if u aint got none

first go and prep the arrow shaft as you would if u were about to fletch it, then

take the masking tape and place it around the arrow shaft were u want the crest to end, and also down the shaft a little to prevent any of thepaint thatwill spray over geting on the shaft if u have removealbe nock pull them out or you can tape over them.

Then spray lightly the arrow shaft till it is white, (or what ever colour uhavechoosen) then let it dry, I do my in 4 or 5 very light coat till it is white, then let it set, usallyi let it set til it is dry to the touch, then i go and glue the fletchings on. that is how i do it i hope i did leave anything out of it.

i would give this a try first before spending the 130 bucks on the cresting kit,,if u dont like how they turned out then you can drop the green on the kit.just my .10

RE: I wanna start cresting
 

I should go take a pic of my crestings...they're beautful! BRB

RE: I wanna start cresting
 

Here we go...stupid size limits. How do you guys get around the 100k limit w/jpegs?

RE: I wanna start cresting
 

trembow,

If you can wait... I promise tomorrow I'll crest up an arrow using my home-made cresting machine (made it for under $25) and I'll post a complete photo essay on it here in the bowhunting forum.

I've been meaning to do it for a while, as it should be very helpful to quite a few folks...

RE: I wanna start cresting
 

here's a couple i did with that very machine, but greg's homemade one would get you out about $90 cheaper after buying supplies.

RE: I wanna start cresting
 

Ive seen that Cabelas has sticky wrap arounds that wofk just as well bet are like a sticker. Just a thought.