Can anyone give me instructions on how to do a european mount??? Any help would be great. Maybe there is a website I can go to.

The first thing you have to do is get all the hair, eyes, brains and GOO out of the skull cavity. You can skin it out and boil the head, or just leave it to rot for a year. I am going to try and put some in the ground this year and see how that works out. I have used a bleach/water solution to get the skull white, just be carefull as bleach will damage the skull and make it brittle. make sure you don't get the horns in the bleach. about 50% of bleach water and soak for 15 min. Take it out and let it dry. It won't become white until it is fully dry. You can also use some white paint on the skull to get the exact color you want. I also think cabelas sells a kit to do the same thing. I think it goes for around 20 bucks, not sure though.

Hello

Heres an interesting read on the subject:

http://ag.arizona.edu/pubs/natresources/az1144.pdf#search='bleaching%20skulls'


I also order plaques for the mounts from Van Dykes, a taxidermy supply house that you should find easily on the net.

Good Luck
Dan

So I guess ther isn't any websites that I can look at or is there

after you do what 5 shot said. as soon as you remove the skull from the bleach place it in some arm and hammer baking soda and water solution this will neutralize the bleach and stop it from eating at the skull. i usaully inscribe my name date and location onto the space between the antlers with a drimal tool the use a permanent marker ink to fill it in. if you do get the bleach on the antlers the will turn white but a little oak wood stain will bring it back to color. Good luck hope it looks great.

Bob!

I know a guy on the taxidermy forum name Godzilla who does european mount's and he usually has quite a bit of info there .Check out the taxi on this forum.

nubo

Sorry Bob ,but I don't see that Godzilla has any post's on the forum ,but if you need his addy I can send it to you .But from what i can see 5 shot has given you some good info on it ,but yes there is a kit you can buy and it will tell you exactly what you need to do .I'd check at Bass Pro or Cabela's or a store similar to them for the kit's.

nubo

There is amny ways to get a european mount. One of the fastest way to get the skin off is put the head in a trash bag and set it to the side.The flys will get on it and start to get magets gooing.After about 5 days take the head to the car wash. The car wash will take every bit of the skin and meat off.I have not tryed the car wash with fresh meat but it may take all the meat off with out the maggets.The car wash works very very good.

Boiling the skull is all so very bad!!!!!!!!!!!!!!
Bo not use bleach!!!!!!!!!!!!!!

Use 40% peroxide and Quick White / super-strength powder lightner.
Mix them togeather making a paste.Than put the paste on the skull. Put the paste on every where you want to be white.If you get any on the antlers just wash off.After puting paste allover the skull,place a trash bag over the skull and tap it there. Let the head set for 2 days.The paste should be totaly dry.Than wash all the crusty paste off.If the skull is not white enough redo what you have done.So far I have not had to do the whitening prosses 2 times.

Thanx guys!!!!!!!!! I will try what you all have said.

Send it to a person with Dermestide beetles. They will eat everything off and do not damage any bone( all the nasal bones are left in tact which is neat). I am sending my two off today.