owners manual for Omega
#1
Hi everyone, I just ordered a TC Omega, Black with stainless.I wont get it until next week sometime, and I would really like to read the owners manual, (I just cant soak up enough info on this) is there anywhere on the net that I can look up the manual for this gun and start doing some reading before I get my gun next week?
#2
Joined: Dec 2004
Posts: 175
Likes: 0
From: Lititz, Pa.
just went over to the T/C site and all they had there was how to order one from them... no online posts... but they do have a good reading Q/A section there, may be able to pick up a few pointers...
#3
Nontypical Buck
Joined: Jul 2003
Posts: 2,922
Likes: 0
It's more simple than you think Big Daddy!
Loose powder & brass powder measure using 80-120 grains (my choice)
180-400 gr sabot that measures .400, .429 .451 (load without a grunt)
Harvester sabots (if bought separately)
Swabbing spray bottle filled with Windshield solution, Windex, Alcohol or both mixed
Good anti-seize grease for the breechplug like CVA Breechplug & Nipple Grease, nickel anti-seize compound, Choke Tube Lube or Tetra Grease
Good solvent that says it removes copper, plastic or lead.... depends on what bullets you buy.
Bore Brush is a must. Can't clean properly with loading jags.
Loading jags need to be the proper ones so you don't deform bullet tips when loading. Some stores sell an assortment in one package. Some are hollow centers... some are more pointier.
Good gun oil like Shooters, Birchwood-Casey, Rem-Oil, Break-Free CLP. If you buy a bolt/plunger action, you'll need an oil with a real wide range of lubrication. The label will tell you the range.
Absolutely no Bore Butters, Wonderlubes 1000 stuff with sabots. Well maybe just a very light pinch around the plastic sabot to aid loading remaining wrong sabot/bullets you purchased by mistake. After-all, don't throw those difficult-to-load bullets away.... shoot um' up
One last thing... eventually get a good 2nd ramrod to keep in your gun case at the range. It's nice to have one for brush-swabbing... one for loading bullets with a jag. Get a T-Handle or sumthin' similar that screws on for better gripping, force... etc.
After you get her open sighted-in, we'll talk scopes cuz' the Omega prefers one that's a tad shorter due to it's stock length. We may also discuss quieting that somewhat-noisy, branch-banging synthetic stock.
Loose powder & brass powder measure using 80-120 grains (my choice)
180-400 gr sabot that measures .400, .429 .451 (load without a grunt)
Harvester sabots (if bought separately)
Swabbing spray bottle filled with Windshield solution, Windex, Alcohol or both mixed
Good anti-seize grease for the breechplug like CVA Breechplug & Nipple Grease, nickel anti-seize compound, Choke Tube Lube or Tetra Grease
Good solvent that says it removes copper, plastic or lead.... depends on what bullets you buy.
Bore Brush is a must. Can't clean properly with loading jags.
Loading jags need to be the proper ones so you don't deform bullet tips when loading. Some stores sell an assortment in one package. Some are hollow centers... some are more pointier.
Good gun oil like Shooters, Birchwood-Casey, Rem-Oil, Break-Free CLP. If you buy a bolt/plunger action, you'll need an oil with a real wide range of lubrication. The label will tell you the range.
Absolutely no Bore Butters, Wonderlubes 1000 stuff with sabots. Well maybe just a very light pinch around the plastic sabot to aid loading remaining wrong sabot/bullets you purchased by mistake. After-all, don't throw those difficult-to-load bullets away.... shoot um' up
One last thing... eventually get a good 2nd ramrod to keep in your gun case at the range. It's nice to have one for brush-swabbing... one for loading bullets with a jag. Get a T-Handle or sumthin' similar that screws on for better gripping, force... etc.
After you get her open sighted-in, we'll talk scopes cuz' the Omega prefers one that's a tad shorter due to it's stock length. We may also discuss quieting that somewhat-noisy, branch-banging synthetic stock.




