CVA .45 twist rate
08-13-2022 | 04:09 PM
#3
Thread Starter
Boone & Crockett
Joined: Jan 2004
Posts: 12,823
Likes: 5
From: Eastern PA
Put a tight patch on the jag and run it down the bore. Wrap some masking tape around the ramrod at the muzzle and mark a reference point on the tape. Pull the rod out slowly allowing it to rotate. When you get where your reference mark is 180* put another piece of tape on the rod at the muzzle. Measure the distance and multiply x2 and you'll have your twist.
08-13-2022 | 08:09 PM
#4
Giant Nontypical
Joined: Mar 2010
Posts: 5,612
Likes: 0
