HuntingNet.com Forums
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   270 Match/Hunter E-MAX Captured (https://www.huntingnet.com/forum/black-powder/400780-270-match-hunter-e-max-captured.html)

Grouse45 08-12-2015 04:03 PM
Originally Posted by Gm54-120 (Post 4212568)
I wont shoot them that hot because its murder on vent liners. You would be lucky to get 30 shots in a standard Savage type plug. The LRMP module plug with a tungsten bushing is good for hundreds of shots with that load though.
I actually have one or two of those plugs, but don't have a savage anymore.

Gm54-120 08-12-2015 04:06 PM
Hmmmmm very interesting or should i say IM very interested.

Old Rick Bibby plugs? Im only familiar with the new ones being sold at smokelessmz

Grouse45 08-12-2015 04:09 PM
Originally Posted by Gm54-120 (Post 4212571)
Hmmmmm very interesting or should i say IM very interested.

Old Rick Bibby plugs? Im only familiar with the new ones being sold at smokelessmz
Yes from Rick, you want that stuff

Gm54-120 08-12-2015 04:20 PM
I would cherish anything RB made. I barely got to post in the forums before he passed away.

Grouse45 08-12-2015 04:22 PM
Originally Posted by Gm54-120 (Post 4212577)
I would cherish anything RB made. I barely got to post in the forums before he passed away.
I've sat with him twice, great man!!

Gm54-120 08-12-2015 04:26 PM
Depending on which design, his was better suited to sabot loads. The recessed version brings the powder closer to the primer. That can be a big benefit with powders like 4198 and sabots in cold weather. I really enjoyed reading his old posts. Ive probably read every one on MML. My barrel is his original spec for contour, its very over built for safety.

Grouse45 08-12-2015 04:37 PM
Originally Posted by Gm54-120 (Post 4212580)
Depending on which design, his was better suited to sabot loads. The recessed version brings the powder closer to the primer. That can be a big benefit with powders like 4198 and sabots in cold weather. I really enjoyed reading his old posts. Ive probably read every one on MML. My barrel is his original spec for contour, its very over built for safety.
Check out the email I sent you. It has pics on it.

BuckDoeHunter 08-12-2015 04:43 PM
Hankins typically uses 78gr of IMR4198 to push a 275gr BE at 3000 fps, at least thats what his video says

Grouse45 08-12-2015 04:54 PM
Originally Posted by BuckDoeHunter (Post 4212583)
Hankins typically uses 78gr of IMR4198 to push a 275gr BE at 3000 fps, at least thats what his video says
I guess I haven't been keeping up with smokeless at all.

ronlaughlin 08-12-2015 06:45 PM
Originally Posted by BarnesAddict (Post 4212529)
What do you think the BC is with that and 89grs of BH?

Those smokeless guys send them a long ways....................Accurately.
If you are asking me.... i don't have a clue. The bullet was shot three times today; the first time i ever shot it. Chances are, i will never shoot it again.


All times are GMT -8. The time now is 09:26 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.