Today in this fast moving world the old Knight 1-30 twist 45 cal. rifle is sort looked down on by a bunch of us as not the RIGHT STUFF for a quality modern 45 cal. inline. The negative portion being the 1-30 twist as the a more popular twist would be faster.

But for myself in my little world the old 1-30 Extreme/Elite are terrific shooters. I had moved all three of my 1-30's off and out of the house as I got caught up in the 1-20 twist of the Knight Super DISC. Recently I had the opportunity to pick up a blued Knight DISC Extreme that came to me in really really good shape - other than a small amount of pitting on the floor of the breech and at the very bottom of the bore. My original intention was that I wanted the Thumbhole Stock that came with it and I was going to use the rest for parts! It has not all worked out that way, I dropped the barreled action into a wood stock that I had acquired from Sqezer, took the TH stock to be inletted for the 'Forked Recoil Lug' and eventually down to the Big Dipper for a Camo job. I am going to go with this 'Lost' pattern



The barreled action... I have shot it 3-4 or four times on trips to the rock pit and/or the farm. The dang thing is just like a Timex 'load it - shoot it' - it really does not care what you load it with or what you shoot from it - it is just repetitive over and over again...

Yesterday we made the trip to the farm, the field was really muddy but I made the trip out in the mud to set up clay birds at different ranges and different shooting angles. I set out 10 birds if a I remember correctly and then it became fun time.

The rifle is really sighted in for a Lehigh/Bloodline 40x200 inside a MMP Light Tan sabot, but today all shot was Speer 40x180 Gold Dots and a couple of Nosler 40x200's. I am running out of the Noslers so I am being a bit stingy with them until I can replace them. They are an excellent shooting bullet and also would make a great 'deer' getter.

Pictures are not the best in the world but hopefully you can get the idea of what was going on...



Today when I cleaned the rifle I also decided that I would try to seal the pitting up a bit so I ended up cleaning the bore 'spic & span' and then I heated the barred action with so that the pores of the barrel would open a bit and I applied Dyna*Tek bore coat to the receiver and the bore. I am hoping that this application might for a seal and bond with the small bit of pitting in the bottom of the bore. Just another one of my experiments... hope it works

I never shot that twist rifle. And while I own .45 calibers, I can't say I shoot them much. But it looks like you have a good rifle there. And a good rifle that shoots the same over and over is just hard to beat. Let me know how that stuff works in sealing the pits.

I have had outstanding good luck with the 1-30 twist in my GM barrel. I also have a 1-18 GM barrel and have not found a bullet yet that I love. The 1-30 will shoot my 409 grain bullets so well that I quite working on the 1-18. Ron

I recently acquired a White Super 91 in .45 cal that has pitting in the breach area and was thinking about doing the same thing to seal it up to make cleaning easier. Please let us know how the Dyna Tek does as I assume should help some! I'll probably sell the gun after I protect it and see how it shoots.

Basically, that was my plan to seal the pitted metal. And if Bore Tek works as they say it really should do just that. Time will tell for sure.