armstech super 91 AGAIN
11-06-2012 | 08:22 PM
#1
Thread Starter
Fork Horn
Joined: Sep 2012
Posts: 131
Likes: 0
From: idaho falls idaho
armstech super 91 AGAIN
I can plumb a house blindfolded.I have worked on nuclear reactors.Ican trap anything with feet.But ill be damned if i can figure out how to get that pull cock bolt out of that gun!!! can anyone help me??
11-07-2012 | 04:50 AM
#2
Guest
Posts: n/a
Pull the plunger back to cock it and turn it clockwise to lock the safety , that makes it easier when you put it back in, take the screw out on the left side of plunger. Put the thumb safety off ( forward) hold trigger and the plunger should pull right out.
Then do it in reverse to put it together
Pulling the trigger allows the sear to move so it comes out easy.
Having the plunger cocked and locked makes it easier to get the screw in when you put it back together . Pm me your number if you have any problems
Then do it in reverse to put it together
Pulling the trigger allows the sear to move so it comes out easy.
Having the plunger cocked and locked makes it easier to get the screw in when you put it back together . Pm me your number if you have any problems
11-07-2012 | 06:33 AM
#3
Thread Starter
Fork Horn
Joined: Sep 2012
Posts: 131
Likes: 0
From: idaho falls idaho
Sharpsshooter the plunger has a slot cut in it a knurled hammer like on a revolver fits in it like a saftey when you pull the plunger back theres no screw in the left side of the plunger. t5heres a long wedge shaped piece that fits under the plunger.
11-07-2012 | 07:16 AM
#4
Guest
Posts: n/a
I can post some pics when I get home or you can pm me a number and I can text some pics ,showing step by step
11-07-2012 | 08:42 AM
#5
Guest
Posts: n/a
This is the first time I've done a video , hopefully it helps. I had my son film it with my phone camera . If it doesn't help post a pic of your gun then I can be more specific ,. Make sure the gun is unloaded .
Here's the link .
http://www.youtube.com/watch?v=5eXPW...e_gdata_player
Sent from my iPhone
Here's the link .
http://www.youtube.com/watch?v=5eXPW...e_gdata_player
Sent from my iPhone
11-07-2012 | 08:57 AM
#6
Super Moderator
Joined: Jan 2004
Posts: 7,492
Likes: 8
From: Wisconsin
The Video was great! You have that plunger/bolt system which my new White 12 GA BG Series Tominator uses in the shown gun #2.
It took me a bit to figure it out a while back but I did gt it in as it is a sumple system. However, I did pick up a few pointers watching your video.
Well done and thanks!
JW
It took me a bit to figure it out a while back but I did gt it in as it is a sumple system. However, I did pick up a few pointers watching your video.
Well done and thanks!
JW
11-07-2012 | 08:58 AM
#7
Boone & Crockett
Joined: Aug 2004
Posts: 11,703
Likes: 0
From: Idaho
This is the first time I've done a video , hopefully it helps. I had my son film it with my phone camera . If it doesn't help post a pic of your gun then I can be more specific ,. Make sure the gun is unloaded .
Here's the link .
http://www.youtube.com/watch?v=5eXPW...e_gdata_player
Sent from my iPhone
Here's the link .
http://www.youtube.com/watch?v=5eXPW...e_gdata_player
Sent from my iPhone
Did you ever get the Lightning that you bought in the batch purchase?
11-07-2012 | 08:59 AM
#8
Nontypical Buck
Joined: Dec 2006
Posts: 2,037
Likes: 0
From: Minnesota
You could possibly have the spring detent system to hold the action instead of the screw. In that case, instead of unscrewing the screw detent you just hold the spring detent out enough so the action will slide right out.
Here is a Super 91 with the spring detent system
Here is a Super 91 with the spring detent system
Last edited by flounder33; 11-07-2012 at 09:32 AM.
