2 questions about new Prohunter FX
#1
Spike
Thread Starter
Join Date: Aug 2006
Location:
Posts: 32

First of all was wondering if someone new what camo patterns they are available in. I have no idea what mine is and Thompson Center was of no help. I really want to buy a camo scope online for it but would prefer it match if at all possible.
Second. This gun has never been fired. What are some recomendations of what to do before shooting it in, breaking it in?? and how to clean it while sighting it in and after?? Any help would be awesome as this was a big investmetn and i want to get the most out of it! Thankyou
Second. This gun has never been fired. What are some recomendations of what to do before shooting it in, breaking it in?? and how to clean it while sighting it in and after?? Any help would be awesome as this was a big investmetn and i want to get the most out of it! Thankyou
#3
Spike
Join Date: Jun 2012
Posts: 30

bowtech, The camo pattern on your FX just may be RealTree AP or Realtree Hardwoods, when you said that T/C was no help all i could do was '' LOL '' because i to have had my fair share of them with no help. P.S. the FX look's like a great gun. Best of luck.
#5
Giant Nontypical
Join Date: Nov 2005
Posts: 6,585

bowtechpatriot1, Usually in the area about two inches above the sling mount on the butt stock and about an inch up into the stock there will be two letters they are hard to see as they are in the same colors as the camo.
quote
What are some recommendations of what to do before shooting it in, breaking it in??
I use alcohol to clean out the metal preservative and give it a 100 strokes with JB barrel polish and a very tight patch.
What to clean with depends on what powder you use for that gun I recommend Blackhorn, try 110 grains and a shock Wave 250 grain for a starting load switch to the bonded for hunting, Montana X Blackhorn cleaner or Hoppes #9 mixed 50/50 with alcohol for cleaning.
On many TC guns the win 209 fits best with least leakage of blowback.
quote
What are some recommendations of what to do before shooting it in, breaking it in??
I use alcohol to clean out the metal preservative and give it a 100 strokes with JB barrel polish and a very tight patch.
What to clean with depends on what powder you use for that gun I recommend Blackhorn, try 110 grains and a shock Wave 250 grain for a starting load switch to the bonded for hunting, Montana X Blackhorn cleaner or Hoppes #9 mixed 50/50 with alcohol for cleaning.
On many TC guns the win 209 fits best with least leakage of blowback.
#7
Guest
Posts: n/a
#8
Spike
Thread Starter
Join Date: Aug 2006
Location:
Posts: 32

ok so the scope im looking at is an APG camo pattern. Will they match??
http://www.amazon.com/Nikon-ProStaff...s=nikon+3x9-40
http://www.amazon.com/Nikon-ProStaff...s=nikon+3x9-40
#9
Guest
Posts: n/a

ok so the scope im looking at is an APG camo pattern. Will they match??
http://www.amazon.com/Nikon-ProStaff...s=nikon+3x9-40
http://www.amazon.com/Nikon-ProStaff...s=nikon+3x9-40