Recently bought a Long Range Hunter. I plan on using BH209, so I ordered the non fpj conversion from Knight. But then I pulled out the bolt and it is all one piece. How does the conversion kit adapt to my bolt?
I also want to mount a scope on it. I called both Burris and Leupold today and only Leupold had a 2 pc standard base: and it was in gloss black.
Help me out fellas!!!

The conversion consist of two pieces... a primer adapter and a new breech plug. The primer adapter drops in the nose of the bolt.... You can see the adapter it s the piece tht supporting the bolt



This is the whole assembly...



I use the Leupold 2 pc set up and really do like it. Another type base you can look at is a Warne 2 pc mount made for Weaver style rings.

Here is a bit of a picture of the Leupolds...



I thougt i had a picture of some QD Warnes but can not find it right now...

The adapter looks like this when it in the bolt and ready to be put back in the action. The breach plug is just a straight swap but you will need a deep well socket or a modified BP tool.


Rem 541 2 piece bases from Weaver and Warne fit Knight round tops.

Warnes offers some nice ones that look like SS too. They accept nearly all rings including mil-spec M4 spacing IIRC.
http://www.midwayusa.com/viewProduct...tNumber=179769