Summer Shooting
#11
Nobody explained why to the the dear boy. I am not an expert by any means nor am I a metalurgist but let me try to explain this to you. Steel expands at a rate of .000007" per degree F. Therefore, if you have a 1" diameter barrel which is nominal at 68*. At 100* that barrel would be (100-68)x.000007" or 1.00022". Now this is outside diameter which, although very small, will increase pressure at any contact points along the stock which will change the harmonics of the barrel. Now add this same expansion rate to the bore will cause the bore to become smaller in diameter which also changes the amount of friction on the bullet as it travels down the barrel.
Then you have to add the increased temperature from continued firing and there you have it - a change in accuracy and or point of impact.
But don't let that stop you from shooting in the summer. Practice, practice, practice makes you a better shot.
Then you have to add the increased temperature from continued firing and there you have it - a change in accuracy and or point of impact.
But don't let that stop you from shooting in the summer. Practice, practice, practice makes you a better shot.
Last edited by bronko22000; 06-10-2011 at 01:54 PM.
#12
Thread Starter
Typical Buck
Joined: Sep 2009
Posts: 921
Likes: 0
From: Kansas
Nobody explained why to the the dear boy. I am not an expert by any means nor am I a metalurgist but let me try to explain this to you. Steel expands at a rate of .000007" per degree F. Therefore, if you have a 1" diameter barrel which is nominal at 68*. At 100* that barrel would be (100-68)x.000007" or 1.00022". Now this is outside diameter which, although very small, will increase pressure at any contact points along the stock which will change the harmonics of the barrel. Now add this same expansion rate to the bore will cause the bore to become smaller in diameter which also changes the amount of friction on the bullet as it travels down the barrel.
Then you have to add the increased temperature from continued firing and there you have it - a change in accuracy and or point of impact.
But don't let that stop you from shooting in the summer. Practice, practice, practice makes you a better shot.
Then you have to add the increased temperature from continued firing and there you have it - a change in accuracy and or point of impact.
But don't let that stop you from shooting in the summer. Practice, practice, practice makes you a better shot.
I knew there was an explanation. When it gets scorching I'll sit it out but for now I will mess around. It's not like I'm going to site a gun in now and not shoot until deer season.
#15
Nontypical Buck
Joined: Dec 2009
Posts: 2,496
Likes: 0
From: Yucca Valley,Ca
It gets hot here in the summer. i just take 2 rifles as some others here seem to do. i leave very early in the morning and don't seem to have a problem with the heat.shorter earlier shooting sessions with more frequency, seem to be the answer for myself in the summer months.in fact the lil lady and i have a outing planned for the morning. we will be out shooting by 6:00 or 6:30 in the am.. Ray
#16
Fork Horn
Joined: Oct 2009
Posts: 316
Likes: 0
From: Portage, Wi.
semi, what I do to keep the heat off me in the summer is have the wife put here HOOTERS t-shirt on and stand close to me and provide me with shade. HEAT not the type that ignites and burns down shanties but the type that excites and brings down panties. sqezer 6-11-11
#17
Banned
Joined: Dec 2008
Posts: 9,186
Likes: 0
From: Boncarbo,Colorado
#18
I don't like shooting in the heat, but I still do sometimes. I bring 2 rifles and alternate shooting, taking breaks. It is still good practice and fun, but I've found that I usually need to have an extended range session in the fall when the weather is cooler to do my final sight in. Sometimes the POI changes, sometimes a load that shot well in the summer doesn't do as well with cooler weather and vice versa. If it's 90 degrees of less, I will consider going out and shooting. Over 90, forget about it...


