|
Rem 700 ML
Was doing a search for a friend who has one of these for a few parts and was wondering are they good guns and what are these conversions I here about?I tried to call these guys this week and they never called back are they out of buisness?
http://muzzleloadingbullets.com/remi...rsion_kit.html |
Originally Posted by donjose
(Post 3808330)
Was doing a search for a friend who has one of these for a few parts and was wondering are they good guns and what are these conversions I here about?I tried to call these guys this week and they never called back are they out of buisness?
http://muzzleloadingbullets.com/remi...rsion_kit.html http://armurierlavaltrie.com/remkit.html This is the company in Canada that makes them in the first place. The other thing you might look at is the the conversion offered by derfhunter on Modern Muzzleloaders Forum... |
Sabotloader,
I was under the impression this gun has the 209 primer breach plug already with it.I was looking on brownells and they have a breach plug for sale is there a different nipple or plug for the breach plug? Thank You Jason |
Originally Posted by donjose
(Post 3808366)
Sabotloader,
I was under the impression this gun has the 209 primer breach plug already with it.I was looking on brownells and they have a breach plug for sale is there a different nipple or plug for the breach plug? Thank You Jason The Remington 209 conversion is terrible dirty. This Canadian Conversion is the better of the two. The Conversion that derfhunter makes might even be better. I even made a bolt conversion to make it more like a bolt and firing pin conversion rather than a plunger/hammer gun. http://www.huntingnet.com/forum/blac...onversion.html http://www.huntingnet.com/forum/blac...-700-farm.html Just a heads up... if the gun does not have the conversion hammer installed you will need to buy a kit. If you go with a Remington Conversion Kit - the hammer will not work with the Canadian nipple and vice versa.... |
Originally Posted by sabotloader
(Post 3808376)
Correct... the same breech plug is used for cap ignition and 209 ignition. You just swap out the different nipples.
The Remington 209 conversion is terrible dirty. This Canadian Conversion is the better of the two. The Conversion that derfhunter makes might even be better. I even made a bolt conversion to make it more like a bolt and firing pin conversion rather than a plunger/hammer gun. http://www.huntingnet.com/forum/blac...onversion.html http://www.huntingnet.com/forum/blac...-700-farm.html Just a heads up... if the gun does not have the conversion hammer installed you will need to buy a kit. If you go with a Remington Conversion Kit - the hammer will not work with the Canadian nipple and vice versa.... Jason |
Originally Posted by donjose
(Post 3808380)
So the replacement breach plug from brownells will work with a 209 primer and will need to find the nipples?
Jason |
okay i understand now any good places for the nipples?
Jason |
Originally Posted by donjose
(Post 3808385)
okay i understand now any good places for the nipples?
Jason Which hammer is in the gun now a percussion hammer or a 209 hammer? http://www.trackofthewolf.com/Catego...71&styleID=785 You will need a 1/4" x 28 nipple. |
Originally Posted by sabotloader
(Post 3808390)
They can be had just about anywhere... Which nipple are you after? A musket nipple or #11 nipple?
Which hammer is in the gun now a percussion hammer or a 209 hammer? http://www.trackofthewolf.com/Catego...71&styleID=785 You will need a 1/4" x 28 nipple. if it has a 209 hammer, will it work either way :pcwhack: Jason |
Originally Posted by donjose
(Post 3808412)
Dont know which hammer is in the gun I guess I will have to find out,
if it has a 209 hammer, will it work either way :pcwhack: Jason |
| All times are GMT -8. The time now is 04:17 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.